Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Phenix Straight Push-Lok - Red/Blue
- JUMP TO
- Overview
- Reviews
- Q&A
- View in Catalog
Overview
|
Phenix Compression Hose Ends are constructed from lightweight 6061 aluminum and designed for smooth flow, easy assembly, and longer life. All elbow ends are built from one-piece billet tube construction, avoiding leakable braze joints. Viton O-Ring seal allows 360 degree rotation. 37 degree AN flare assures leak proof sealing surface eliminating the need for taping. Compatible with all AN adapter fittings. Made in USA. Compatible Hose Type: Push-On Hose |
Reviews
Fantastic! Works as advertised . Saved my guys a lot of time. Thank You !!
Verified Purchase
Phenix Fitting J31000-2,AN-10 Straight Push Lok Hose End
I use the J3400-2 with Tygon tube. Once the tube is pushed on it is there to stay. No hose clamps required. You have to carefully cut the Tygon tube to remove the tube from the J3400-2. Extremely difficult to just pull the Tygon tube from the J3400-2. No leaks. Would recommend these for pitot static lines with Tygon tube. This is mainly what I have used them for. However I have also used these with Tygon tube up to 50 PSI, with no problems and no hose clamps. Well made hose end.
Verified Purchase
Phenix Fitting J3400-2
Very good quality
Verified Purchase
Phenix Fitting J3600-2
Good quality, light weight, nice finish
Used these fittings for my vacuum powered instruments. Made removal for future servicing much easier.
Appear to be excellent product except the barbs are so big I could hardly get the Helix tube over them.
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Use 3/8" I.D. tubing.
1/2" I.D. rubber hose.
Yes, J2400-2 is used with 1/4" I.D. hose.
Our part # 04-02120 cross references to J3400-2. J3400-2 has superceded J2400-2. Please see our part # 04-02120.
You can use the PHENIX BLACK BRAIDED HOSE with these fittings.
No, these are not approved for use with 193 hose.
