Description | Application | PN | Price | Buy |
---|---|---|---|---|
5-Inch Skull Spinner Dome | Wood or Metal Props on Continental A-65 to O-200 engines | 05-04861 | $69.03 | |
5-Inch Skull Spinner Dome - With mounting bracket & hardware | Wood or Metal Props on Continental A-65 to O-200 engines | 10211 | $99.00 | |
6-Inch Skull Spinner Dome | Lycoming O-235 to O-360 engines and Cessna 170s | 05-04862 | $61.33 | |
6-Inch Skull Spinner Dome - With mounting bracket & hardware | Lycoming O-235 to O-360 engines and Cessna 170s | 10221 | $90.15 | |
Skull Spinner Dome Mounting Bracket & Hardware | For both 5-Inch & 6-Inch Skull Spinner Dome | 05-21800 | $27.50 |
Skull Cap Spinners for your A-65 to O-200 Continental or O-235 to O-360 Lycoming engines. 5-inch diameter - For wood or metal props on Cont. A-65 to O-200 engines. 6-inch diameter - For Lycoming O-235 to O-360 engines and Cessna 170s. Measures 6-1/4" diameter to clear 6". Made in USA |
This Spinner is perfect. Easy to polish using scotch bright, 2000 grit wet then metal polish. The new bracket is much sturdier than the original that was on my plane.
5 Skull Spinner Assembly Unpolish
It arrived quickly and since it was going on a wood prop with a 1/8 thick face plate, I did need to slightly bend the legs of the supplied mounting bracket to make them a bit shorter so the spinner came in contact with the prop but it fits great and looks perfect. Thanks for the great product.
5 Skull Spinner Assembly Unpolish
Was nice to find this bracket at Aircraft Spruce, had been looking for some time
Bracket And Hardware For Skull Spinner
Nice spinner for my Cub with a O-290 engine on it, to bad the polished one I ordered arrive a couple months ago.
6 Skull Spinner Dome Unpolish
Bracket And Hardware For Skull Spinner
Came very quickly, looks good. Thx
5 Skull Spinner Dome Unpolish
5 Skull Spinner Dome Unpolish
Perfect fit, well made item.
Bracket And Hardware For Skull Spinner
5 Skull Spinner Dome Unpolish
excellent service
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Part # 10211 comes with the spinner dome along with a bracket and hardware.
This is actually 6.16" ID.
No, these are not FAA PMA Approved.
Yes, these can be primed and painted.
It is stress relieved and plated 14 gage mild steel for the 10203 bracket and .040 minimum 0 temper 6061 Aluminum for the 10201 spinner.
They are both 3.65 +/-.062 tall and are .040" minimum thickness. 1.016mm thick.