THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | +61 (1800) 953522

Artex G406-4 ELT With Rod Antenna

Select Model:
For USAFor International
Price Includes GST
Quantity
Add to Wishlist

Overview

The Artex G406-4 transmits on all 3 emergency frequencies (121.5/243.0 and 406 MHz). The ELT automatically activates during a crash and transmits the standard swept tone on 121.5 and 243.0 MHz. The G406-4 also transmits a 406.025 MHz encoded digital message to the Cospas/Sarsat satellite system, which allows for rapid identification and reduces Search and Rescue response time. The G406-4 has been tested to meet the rigorous requirements of TSO C126 including 500 G shock, 1000 pound crush as well as flame and vibration tests. The G406-4 is available for use with Artex's low cost whip antennas or a sturdy fiberglass rod antenna. The G406-4 also may be interfaced with the Artex ELT/NAV Interface which enables latitude and longitude data to be transmitted as part of the 406.025 MHz message. The G406-4 is value priced to meet your ELT needs.

406 MHz Emergency Locator Transmitter (Type AF ELT) Cospas/Sarsat Approved, FAA TSO C126 Approved, ETSO-2C126 Approved

Specifications

  • Operating Frequencies: 406.025 MHz ± 2 kHz Biphase L (16K0G1D) 121.5 & 243.0 MHz ± 0.005% (A3X)
  • Output Power: 406 MHz; 5 W ± 2 dB (520 ms / 50 sec) for 24 hours @ -20º C, 121.5/243.0 MHz: 100 mW min (+20 dBm for 50 hours @ -20º C)
  • Output connector: BNC Female (121.5/243 MHz); TPS Female (406 MHz)
  • Activation: Automatic by 4.5 ft/sec G-Switch or Manual
  • Battery: 5 year Lithium (LiMnO2, solid cathode)
  • Operating Temperature: -20º C to +55º C
  • Storage Temperature: -55º C to +85º C
  • Self Test: G-Switch enabled, 406 MHz Power, Antenna/Coax Connection, Position Data Present, Low Battery
  • Remote Control: ON/OFF/RESET
  • Antenna: Rod (110-320) (<350 KTS)
  • Whip Antenna Configuration requires use of 2 antennas: Whip (110-324) (121.5/243 MHz <250 KTS) and Whip (110-329) (406 MHz<250 KTS)
  • Mounting Hardware: Mounting Tray 452-3074, Protective Top Cover P/N 452-3073, End Cap P/N 452-3072
  • Other Parts: Coax cables, Buzzer (to alert ground crews of accidental activation)
  • ELT Transmitter Weight: 3 LB 5.8 oz Max (1.53 Kg)
  • Mounting Tray Weight: 7 oz (200 g)
  • Protective Top Cover Weight: 6.7 oz (190 g)
  • End Cap Weight: 3.8 oz (108 g)
  • Total Weight: 2.02 Kg
  • ELT Transmitter with Mounting Hardware Installed Measurement: 11.74" (298mm) L x 3.90" (99mm) H x 3.82"( 97mm) W
  • Part Numbers: G406-4: 453-5012 (Transmitter Only)

Reviews

Q&A

Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.