Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Side Intake Homebuilders Cabin Heat Box
MFR Model# DL-015
- JUMP TO
- Overview
- Reviews
- Q&A
- View in Catalog
Overview
| This box is identical to the standard cabin heat box, P/N DL-001, except that the air intake is parallel to the firewall rather than coming straight in from the heat muff. This gives the builder the option of running scat tube parallel to the firewall. Total weight is 5.2 ounces and has a 2" inlet/outlet port. Furnished with a flange gasket and four mounting rivets. Can also be bolted to firewall. |
Reviews
Worked as advertised. Combined this with the Turbo Heat Muff and installed in a Mustang II.
This is a pretty well made box but the clicking for the control arm is horrible. Cannot simply connect a Bowden cable directly through the firewall to control like others. Have to come in from below (problematic for right applications) and loop up with a security point. Would return if I could. Also when you secure the unit to the firewall it pinches the control valve arm and binds a bit
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This will weigh .33lbs. and measures out to 3.07"L x 3.12" W x 3.16 H.
There is a flap attached to an arm that opens and closes the hole to the cabin. You will need to attach a control cable to the arm to open and close it from the cabin.
You may need the standard version(08-04000) for your application.
