ALCOR CLAMP 3-1/4 EGT/TIT PROBE
GROUNDED, .80 OHM, TYPE K *All ring terminals and hardware. |
This item was shipped to me quickly. I appreciate the detailed product description when ordering. This is a perfect fit for my airplane.
86255 Alcor EGT Probe Type K
Exact fit. Easy to install.Kit comes with new tiny screw and nut set insulatoe sleeve and zip ties.
86255 Alcor EGT Probe Type K
Whats alive again!
86255 Alcor EGT Probe Type K
Aircraft Spruce is the best at expediting shipping and delivery
86255 Alcor EGT Probe Type K
I had a failure of my Cylinder #1 EGT Temperature probe recently, I ordered this new one. It took about 2 hours to install properly, and it worked fine on the test flight. In fact, I discovered that this version of the EGT probe is actually built much better than the original was (it seats much better into the exhaust manifold). The electrical parts were of sufficient length for Cylinder #1, but might not have been for others. The wiring was compatible with my current wiring.
86255 Alcor EGT Probe Type K
Worked great after install.
86255 Alcor EGT Probe Type K
OEM probe fits and works perfectly. Nothing better than “plug and play”.
86255 Alcor EGT Probe Type K
Perfect fit and replacement. All you need yo replace this item included.
86255 Alcor EGT Probe Type K
Excellent machine work, great piece of equipment.
86255 Alcor EGT Probe Type K
best and most reliable probe doesnt fail at the ferrule like other products I have used
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The lead from the probe to the terminals is about 12 inches. You can order 42525 which is a 90" extension lead (this is there shortest extension lead).
JPI recommends using their type k thermocouple probes with JPI units.
P/n: 86255 is a grounded probe designed for use with analog indicators, versus p/n: 10-86339 (86317 or 86343) is ungrounded designed to be used with digital indicators.
Yes, the red lead is shorter than the yellow lead.