Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
West System G/Flex 650-8 Liquid Epoxy
MFR Model# 9223132
Overview
|
G/flex 650 is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives G/flex 650 the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials.
It can be modified with West System fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, G/flex 650 gives you 45 minutes of working time at 72°F. It reaches an initial cure in 7 to 10 hours and full cure in 24 hours. 650 G/flex Resins should be paired with comparable size 650 G/flex Hardeners. Includes 4 ounces of resin and 4 ounces of hardener. |
Features
- More flexible than standard epoxy or polyester resins
- Structural bonds absorb stress of expansion, contraction, shock and vibration
- Good for bonding dissimilar materials
- Can be modified with WEST SYSTEM fillers and additives
Specifications
- Formulation: Two-part epoxy
- Mix Ratio: 1 : 1
- Working Time: 46min. @ room temperature
- Drying Time: Initial cure: 6-10hrs.; Full cure: 24hrs.
In The Box
- 1 - 4 Ounces Resin
- 1 - 4 Ounces Hardener
Reviews
Great product. Meets or exceeds what I expect from West System product line.
Verified Purchase
West System G/Flex Epoxy 650-8
Great results....as described.
Verified Purchase
West System G/Flex Epoxy 650-8
Its the best epoxy I have used in over 45 years.
Verified Purchase
West System G/Flex Epoxy 650-8
Have used this for bonding steel, aluminum, carbon fiber, etc. Always following west recommendations--especially for aluminum-- and it has never disappointed. Will harden in surprisingly cold ambient temperatures, as well.
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, this will create a strong, flexible bond with 2024T-3 aluminum.
Yes. The key is to apply the peel ply when the adhesive is still wet, and as long as the peel ply is wetted out, he can peel off the peel ply when cured and it will have the same texture as a laminating resin system.
We believe this would work for that application. It should brush on but it is a little thicker.
No, This epoxy does not have and FAA approval. We can provide certs and MSDS sheets
