THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | +61 (1800) 953522

2024T3/T4 Bar 1/4 X 1/2 X 1

$9.68/Each
Price Includes GST
Part# 03-00104-1
Size (In.)Wt./Ft. (Lb.)Part No.
1/4 x 1/2.14703-00104-1

Overview

Unlisted sizes of aluminum rod and bar available in full 12 ft. lengths. No charge for cutting to 8 ft. or less for UPS. Longer lengths shipped via truck.

If manufacturing test reports are required, there is a minimum $15.00 charge per order. Please indicate in the special instructions box at the time of order that certs are required.

If requesting specifically a T3 or T4, please call 877-4SPRUCE

Reviews

Exactly what I needed. Perfect. Thanks Walt

Walter O
May 20, 2021

Just what I needed

M S
March 22, 2021

finish was a little rough - sanded up perfect though. Good price for the 2.5x.125x12 bar

Ottmar D
September 24, 2020

Came as ordered and per the specs I was looking for!

Dustin H
August 25, 2020

Good Job on this order however, the next order was horrible on delivery. Paid for overnight over $58 for a $35 item purchase and received in two (2) days.

Adam
May 8, 2020

Arrived quickly and undamaged.

Dennis E
December 26, 2019

always fast shipping and great quality

Robert E
November 17, 2018

Ordered a 4 foot piece of 1.75 and 2 shipping was pretty high but it was what I needed and shipped quick. Thanks

Bob M
February 8, 2018

Aircraft spruce is the best! They cut the bar as I requested! Perfect! Thank you very much!

Raphael L
December 30, 2017

Material was fine. Made laniding gear for a RC Cap 232. Im old fashion and still order by phone. Your staff is excellent. This order took about a minute on the phone. No registering or remembering passwords, just plain fast! Keep it up. Don

Don C
September 9, 2017

Q&A

Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Is the 2024-T3 rectangular bar made to QQ-A-200/3 or QQ-A-225/3?

No, the tech data sheet shows it meets QQ-A-225/6.

Q: Is this material in fact T3 and not 351 or 3511?

This material is T4. If T3 is required, must be requested at time of order.

Q: I just ordered some of this 2024T3 rectangular bar and when I received the invoice, some of the bars are listed as T3 and some T4.....can I use T4 interchangeably with T3? I have read the Aluminum temper information you have on your site which was helpful to understand the difference but it didnt answer my question.

Yes, per our tech support they are interchangeable.

Q: Which is the harder (to bend) 2024T3 or 6061T6?

2024T3 is going to be the harder material to physically bend.