THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | +61 (1800) 953522

2024T3 Aluminum Sheet .040 X 2X2

$25.29/Each
Price Includes GST
Part# 03-28160
Thick. (In.)Wt/Sq.Ft.
(lbs.)
Surface
Finish
SizePart No.
0.0400.576Alclad2’ x 2’03-28160

Overview

Aluminum alloy sheet is sold in the thicknesses and sheet sizes shown in the table. Order by part number. No guarantee against scratches is possible due to the handling required to cut sheets to sizes shown.

CUTTING CHARGES: We can cut standard sheet sizes shown in the table to special sizes, but special order cutting charges will apply. Cutting Charges range from $20 to $50 or more depending on sizes desired and number of cuts. Special shapes are not cut, only straight edges. Request quote on Cutting Charges prior to order, as special cut pieces are not returnable.

Mfg test reports are available for an additional charge per line item.
  • Frequently Purchased With
  • Customers Also Viewed

Reviews

Arrived on time and in good order.

Curtis W Verified Purchase

2024T3 Aluminum Sheet .040 X 2X2

December 21, 2024

Please

Jean R Verified Purchase

2024T3 Aluminum Sheet .040 X 2X2

May 16, 2024

I needed this for a couple of inspection covers

Brian E Verified Purchase

2024T3 Aluminum Sheet .040 X 2X2

April 14, 2023

Everything was fine and the material was protected both sides. Thanks

Abdiel P Verified Purchase

2024T3 Aluminum Sheet .040 X 2X2

January 26, 2023

Just what I ordered

Rich R Verified Purchase

2024T3 Aluminum Sheet .040 X 2X2

April 23, 2022

You must quote freight charges (estimated) prior to billing.Pisst off customer.

Jack S Verified Purchase

2024T3 Aluminum Sheet .040 X 2X2

February 26, 2022

I ordered this gauge 2024 Al sheet along with several other thicknesses (0.020, 0.032, etc.) to make dimpling check gauges. All sheets were shipped promptly and well protected in honeycomb cardboard. Arrived in excellent condition.

Theodore E Verified Purchase

2024T3 Aluminum Sheet .040 X 2X2

October 13, 2021

As good as it gets.

Charlie F Verified Purchase

2024T3 Aluminum Sheet .040 X 2X2

September 3, 2021

Michael C Verified Purchase

2024T3 Aluminum Sheet .040 X 2X2

June 18, 2021

No issues...

Larry V
May 14, 2021

Q&A

Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What is the thickest sheet aluminum that can be rolled for shipping with UPS? 2024t3 and 6061t6

The thickest we can roll for shipping is .032 on both 2024t3 and 6061t6.

Q: With 2024 t3 4x12 .025 sheets. Does the polished surface have a protective covering to keep the mill finish pristine? Thanks, Jared

The aluminum sheets have a plastic sheet on both sides for protection.

Q: With 2024 t3 4x12 .025 sheets. Does the polished surface have a protective covering to keep the mill finish pristine? Thanks, Jared

The aluminum sheets have a plastic sheet on both sides for protection.

Q: Which way does the grain run on a 2025T3 2' x 4' piece?

The grain will run across the 2' section.

Q: Are both sides of the 2024T3 aluminum alcladed? If not, which side is? The printed or unprinted side?

Yes, the alclad coating is on both sides.

Q: What certified specification does this 2024-T3 material meet?

This 2024-T3 meets the following specs: AMS4462, AMS-QQ-A-250/5/RevB, ASTM B 209/Rev10, CMMP 019/RevD, CMMP 025/RevU

Q: With 2024 t3 .040 sheets, is there plastic on both sides for protection (as you noted is the case for 2024 t3 .025 sheets)?

Yes, there is protective plastic on both sides of the sheet.

Q: What is the thickness tolerance of 2024-T3, 0.032 sheet ?

+/- 0.003

Q: Aluminum sheet orders can only be ordered in a maximum length as part numbers shown?

Yes, full sheets of 2024T3 are 4' x 12'.

Q: the full sheet 4 x 12 (in inch or ?) thanks

Full sheet 4 x 12 is 4 ft x 12 ft.