Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Oil Seperator Install Kit 6 Cyl
- JUMP TO
- Overview
- In The Box
- Reviews
- Q&A
- View in Catalog
Overview
|
Anti-Splat-Aero is very proud to offer these installation kits that compliment our products “THE ASA OIL SEPARATOR” (05-12369, 05-12472, 05-12473 & 05-12474). Included are three feet of high-quality silicone hose, four quality hose clamps, one steel braid -4 AN Teflon™ oil return hose, one -4 AN X 1/8” NPT 90 Deg. Fitting and one 1/8” X 3/8” NPT reducer bushing that fits the oil return in the accessory case on most Lycoming engines. Also included with the 6-cylinder version is a new accessory case breather fitting that is more IO-540 friendly when installing on the six-cylinder engines. Full installation and maintenance instructions will be included as well. |
In The Box
- 3 - feet of high quality silicone hose
- 4 - quality hose clamps
- 1 - steel braid -4 AN Teflon™ oil return hose
- 1 - 4 AN X 1/8” NPT 90 Deg. Fitting
- 1 - 1/8” X 3/8” NPT reducer bushing that fits the oil return in the accessory case on most Lycoming engines.
- Accessory case breather fitting that is more IO-540 friendly when installing on the 6 cylinder engines (Included only with 6-Cylinder Kit)
- Full installation and maintenance instructions will be included.
Reviews
Good kit to go with the Anti-Splat. However I still had to rig the return to sump line as the one on the Anti-Splat and hose in the kit is threaded and installation on an LYCO IO-540-T4A5D has the return conected with the #5 cyl return, that has straight lines with hose clamps.
Verified Purchase
Oil Seperator Install Kit 6 Cyl
Really worth purchasing. Makes fitment very easy.
Highly recommend to help make the installation a breeze.
Parts are of good quality, hose is a bit short, you’ll need minimum of 4ft, kit only comes with 3ft, but they sent me enough to complete install after made the case that kit hose is too short.
Probably as good as any. The bracket mounting holes are huge and even AN4 bolts are loose. The installation kit probably isn’t worth the money- easy to find parts at any airport for less than $20.
Do not use the brass 1/4 - AN4 fitting. The one I installed snapped and had to be extracted from the crank case using an easy out. I was lucky to get it out. Only use steel fitting, which is what should be supplied in the kit
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes. These are not certified and would require a 337.
There are 2 lines that come in this kit. The blue hose is 3-1/2 feet long and the stainless steel braided line is 1-3/8 feet long.
