Nuvite engineers have formulated a system of polishes to meet the needs for almost any metal and paint polishing project. New metal to antique, the formulations in the NuShine II Polishing System will give superior definition, highlights, imagery, clarity, and will retain the finish longer than normal polishes. Nuvite’s NuShine II graded polishes use high technology materials with programmed abrasive characteristics and are blended with superior carriers to offer the ability to produce cutting action when needed, yet offer micron-level finishing in the finer grades that produces highest reflectance and image excellence. |
Great stuff. Makes me want to enter my plane in a show competition.
Nu-Shine Polish 1/2 Lb Grade S
Nu-Shine Polish 1/2 Lb Grade S
Nu-Shine Polish 1/2 Lb Grade S
Works well on my Sonex!
Nu-Shine Polish 1/2 Lb Grade S
Great product but I found out early that I should have started with a little tougher grit as the vintage camper Im polishing has some scratches - so I ordered more and am anxious to get started. Even the 2 grades (C & S) that I ordered first did an amazing job on the small area I did. The bare aluminum is pretty close to a mirror finish. Im looking forward to seeing what the next order can do for her.
Nu-Shine Polish 1/2 Lb Grade S
Did a fine job on my 1961 Airstream
Fast delivery with certs and full shelf life!
Works great
Speedy service
Great!
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, per the MSDS sheet, it lists the following: Silica (SiO2)(Respirable Dust)* - OSHA PEL 0.1mg/M3 - ACGIH TLV 0.01mg/M3 - % (Optional) 15. Note: SiO2 is embodied in product, thus restricting respirable dust conditions.
Please request c of c at time of order for certificate with included expire date for the can. It can also be looked up after the order via the manufacturing lot #.
Yes the Nushine products can be used on Alum., Brass, Copper, Steel, etc.
F7 would probably be the best option. More cut than G6 but not as aggressive as F9.
Yes, C of C can be furnished with order. Please request at time of order. Additional fees may apply.