I used this tape to replace an earlier wear tape that I had originally installed on the leading edge of the flaps where it rubs on the wing skin overhang on my RV6-A. It is thinner than the previous material that I replaced because of sun damage. It goes on very clear and smooth, seems to have excellent adhesion. I also used a thin strip under the wing skin overhang so it will only have poly to poly contact as the flaps move. I do not know how it will hold up to the suns UV so I will retract flaps when parked out at airshows. Hangar neighbor is getting some from me to use on intersection fairings on Mustang Two.

Generally unacceptable for AC usage- Isnt Transparent, but actually a pale yellow- VERY THIN, while it may be slippery, it isnt THICK by any means- EXTREMELY hard to separate from its backing during installation, and if you even breath hard the inside tacky edge, it will show through. Fingerprints on the inside look like a crime scene. After aprox 20 hours on a cessna 206 strut ( to protect from strut chafe) and tape started separating from tacky lining- Terrible- Never again-