Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Superflite Non-Certified Fabric
MFR Model# SF104A
- JUMP TO
- Overview
- Reviews
- Q&A
- View in Catalog
Overview
|
Superflite’s light weight fabric. This fabric is NOT FAA-Approved. 1.8 ounces per square yard, 72 inches wide. Used primarily on ultralight and some experimental aircraft. Applied using the Superflite U500 adhesive and shrunk with an iron at three temperatures – 250º, 300º, and 350º. |
Reviews
great covering material
Verified Purchase
Superflite Non Certified 1.8 71
Excellent fabric, very light, used on display model of the Wright Bros Flyer I..
Verified Purchase
Superflite Non Certified 1.8 71
Thank you for your manufacturing this nice product that many of us use in our radio control model airplanes. In the past I used and iron on fabric manufactured by Black-Baron Coverite. Unfortunately, it has been discontinued as our hobby is going through a cycle of very few newcomers, people passing away, etc. With this PET fabric I am covering a Spacewalker model airplane and then I will built an Aeronca Champ. Again, from my home country Colombia, South Amercica I want to thank you for keeping this product for our hobby. I wish you all the bested happy times. Best regards, Pablo Fernandez
This is a 1.8 oz/sq yard white dacron, that behaves just like the 3 oz dacron. It will attach to an airframe with all sorts of glue (including white glue). It will shrink with a heat gun, and is quite strong. (Dont use this on lightweight structures, as it may warp them when you shrink the cloth.) It can be sealed and painted as you would the 3 oz dacron, for that old fabric covered look on RC airplanes.
Looks good have not used it yet. Dave
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per inch, the thread count is 94 for the warp and the fill on the 104 fabric.
Both sides are the same.
We recommend using all the of the same manufacturers products throughout your project. We do not have any data to confirm compatibility when mixing products.
1.8 ounces per square yard, 72 inches wide.
This is also a polyester material, similar to Dacron, and be attached using the same fabric cement as Dacron.
Yes that is correct.
