Part Number | Range | Lighted |
---|---|---|
10-00198 | 0-170 knots | No |
The 8000 Series Airspeed Indicator is intended for use on an aircraft to indicate the speed relative to the air at sea level and at any other altitude, to indicate the equivalent speed corresponding to the actual force of the air. When properly connected to an airspeed tube, mounted so as to be in undisturbed air, the airspeed indicator measures the differential pressure developed between the pitot and static opening. The pressure is indicated in units of airspeed (mph and/or knots). These 8000 series United airspeeds are TSO’d for installation on certificated aircraft. Factory new. Available in dual scale MPH/knots, or in MPH or knots only. Fits standard 3-1/8” panel hole. Wt: 0.7 lb. Available with custom range marks see "Options" tab. *NOTE* - All lit instruments require a light tray. Light tray sold separately. See accessories. |
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, as the United airspeed indicators are certified and have a TSO rating. There is no STC listing for a specific aircraft so a 337 will still have to be done.
Yes, these are considered a 3" gauges by the manufacture which will fit a 3-1/8" hole.
You can order part number 10-02614 with the gauge to add custom range markings.
The manufacturer takes 3 days to mark the instrument. This is after the manufacturer receives a copy of the pilot operating handbook page which shows the range markings.
This is 3 1/8" with a depth of 2.30".
Yes, as the United airspeed indicators are certified and have a TSO rating. They can be installed in certificated aircraft.
The custom markings option part # is 10-02614. When you add the main instrument to the shopping cart, it will offer the custom markings as an option. United Instruments are manufactured in the USA.
Yes, this is FAA TSO approved for use in certified aircraft. Once the main unit is added to cart, the system will prompt with an add on option for "Silk Markings" which are special order and custom.