THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | +61 (1800) 953522

Electronics International Fuel Flow Transducer FT60

$259.55/Each
Price Includes GST
Quantity
Add to Wishlist
Part# 10-01196
MFR Model# FT-60

Overview

Flow Transducer. For use in Aircraft with engine-driven fuel pumps & Horsepower up to 350 HP.

E.I. products include all documentation and certifications

Specifications

  • Fitting: 1/4" female NPT
  • Flow Rate: .6 to 70+ GPH
  • Pressure Drop: .6 psi at 30 GPH / 2.3 psi at 60 GPH

Documents

Reviews

Used this product before. Works great. Was able to calibrate it with my Dynon Skyview.

Murray M Verified Purchase

Electronics International Foot 60 Fuel Flow Transducer For < 350HP / Fuel Pump

November 27, 2024

Ladislav P Verified Purchase

Electronics International Foot 60 Fuel Flow Transducer For < 350HP / Fuel Pump

September 5, 2024

Nice size, well made, just right for experimentals.

Dave P Verified Purchase

Electronics International Foot 60 Fuel Flow Transducer For < 350HP / Fuel Pump

March 15, 2024

Previous one lasted 1000 hours then failed. This is direct replacement, hope it does better.

Lane H Verified Purchase

Electronics International Foot 60 Fuel Flow Transducer For < 350HP / Fuel Pump

January 2, 2024

Great product, fast shipping and good value

Harold W Verified Purchase

Electronics International Foot 60 Fuel Flow Transducer For < 350HP / Fuel Pump

October 21, 2023

Mercedes M Verified Purchase

Electronics International Foot 60 Fuel Flow Transducer For < 350HP / Fuel Pump

August 8, 2023

They arrived in Australia in 4 days and not damaged

Asia P Verified Purchase

Electronics International Foot 60 Fuel Flow Transducer For < 350HP / Fuel Pump

July 3, 2023

Overall satisfied with the CGR30-P engine analyzer, however the fuel flow transducer failed after approx 300 hrs. Replacement works great.

River C Verified Purchase

Electronics International Foot 60 Fuel Flow Transducer For < 350HP / Fuel Pump

January 12, 2023

Jaakko M Verified Purchase

Electronics International Foot 60 Fuel Flow Transducer For < 350HP / Fuel Pump

October 18, 2022

Jaakko M Verified Purchase

Electronics International Foot 60 Fuel Flow Transducer For < 350HP / Fuel Pump

October 18, 2022

Q&A

Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What is the warranty for the EI FT 60 transducer?

The warranty is 1 year and can only be returned to us with in 30 days not installed (new condition). If you need to confirm the FT 60 will work please let us know your engine make or model or contact EI.

Q: Can the Electronics International Fuel Flow Transducer FT60 be used with a gravity fed engine without a fuel pump?

The FT60 is to be used in an aircraft with engine-driven fuel pump & Horsepower up to 350 HP. For gravity fed systems, please see the FT90 part #10-01224.

Q: What size threads does the EI Fuel Flow Transducer FT60 use?

The EI Fuel Flow Transducer FT 60 has two female 1/4" NPT (national pipe thread) ports. Adapters are also available to fit 1/4" NPT threads.

Q: What is the difference in PN 10-01165 Dynon EMS fuel flow sensor and PN 10-01196 EI FT-60?

Part number 10-01165 and Part number 10-01196 are exactly the same part. Dynon uses the EI FT 60 for their systems.

Q: Can the FT60 be used on a fuel injected engine with Fuel pressure of about 60 psi?

Per EI, this would work.

Q: I have an IO-540 300 hp engine with electric and engine driven pumps. Does the transducer go downstream of the engine pump and before the servo?

Yes the transducer will always need to go downstream and before the servo is fine.

Q: Can you please confirm if the Fuel Flow transducer assembly (Part No. 10-01196) comes with 1/4" NPT fittings in addition to any wiring?

Yes, the EI FT60 uses 1/4" NPT fittings and wires needed to connect to your electrical system.

Q: Where can I find a wiring diagram for the FT60?

There is no wiring diagram available at this time. The red wire is +5V power, black is ground and the white wire is signal.

Q: Can the FT60 be used only with 5 volt supply or can it be used with 12v as well?

The FT-60 receives its power from the instrument it is connected to. Both 12 and 24V systems are compatible with this transducer.

Q: Is there any wiring included with the EI FT60 transducer that goes to the gauge?

There are short wires included which you will need to splice to connect with the gauge.

View in Catalog

View Image View in Catalog