Dimmable LEDs encased in a flexible resin strip. Ideal for mounting under glare shields for instrument panel lighting. Red LEDs, also available in white and blue. |
The lights work great but the connectors are very fragile. I had installed a section and lightly pulled the wires tight and the solder broke loose on both wires. I had to pull it all out and I re-soldered them on and shrink wrapped it. Put new outdoor 3M tape on and reinstalled. Since I was soldering anyway, I added leads to the cutoff section and made an additional light strip saving me $40 bucks on a separate strip. Lights are very bright! So a dimmer should be considered.
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.