THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | +61 (1800) 953522

Bogert Aviation Talon Oil Filter Removal Tool

$49.50/Each
Price Includes GST
Quantity
Add to Wishlist
Part# 11-11556
MFR Model# 10M-TALON

Overview

The 10M-TALON oil filter tool has undergone some changes through the years, improving as the demands of general aviation become greater. The TALON is one of the strongest and most compact yet. Just pop the TALON on a 3/8 drive extension and ratchet and it gets the job done.

The TALON Oil Filter Tool was created to remove stubbornly stuck oil filters. The tool is meant to be safe in tight quarters and unable to slip, attempting to minimize damage to nearby components. This is still a messy process but this tool is your best chance of removing stuck filters without damaging anything else.

Size:
Adjustable down to 1.10" in three prong mode for smaller oil filters
Adjustable down to .95" in two prong mode for smaller oil filters
Adjustable up to 3.14" for larger oil filters

Features

  • Three pin (TALON) engagement in oil filter plate for stability and strength
  • Good for up to 1500 in. lbs. of torque
  • Works in tight spaces!
  • Works on Aircraft, Automotive, Marine and Recreational Vehicle applications
  • Made in the USA

Instructions

  1. Open the filter can and remove the filter element. If necessary, cut or tear open the filter can where ever it is accessible, gaining access to the filter element.
  2. Use the new filter as a guide. Set the pin positions on the 10M-TALON Oil Filter Tool to fit into the oil holes in the oil filter plate.
  3. Insert the Oil Filter Tool into the stuck filter can using a 3/8" ratchet extension and ratchet wrench. Engage the oil holes in the filter plate with the pins of the oil filter tool.
  4. Turn counter clockwise to loosen the filter.

Benefits

  • This is a lot less frustrating than trying to remove a stuck filter by any other method
  • Saves time so you can do other things
  • Saves money

Reviews

Product worked well. Was used on seized tractor hydraulic filter after failed traditional attempts including hammer and chisel. Happy with product.

Matt S Verified Purchase

Bogert Talon Oil Filter Tool

April 2, 2025

I attempted to remove a stuck on oil filter that some gorilla from the dealer put on. I ended up shredding it to just the top ring. After some research, I bought this and for 2 days, waiting for this to arrive in the mail, I tried everything I could think of. Once it arrived, I was able to remove the filter, though it still took over 30 minutes. This tool is an absolute life saver.

Joshua M Verified Purchase

Bogert Talon Oil Filter Tool

March 31, 2025

I was stuck with a collapsed filter. This product saved me. It got here fast, too.

Robert B Verified Purchase

Bogert Talon Oil Filter Tool

March 14, 2025

I worked for about 2 weeks to get my oli filter off of my 1963 Chevy C10 Truck. It would budge! This had happend before and I had to tow it to the garage. This time I had more time then money...so I tried the old screwdriver trick ...np go ..I tried dremeling it off tore the filter up and still no go. I found 2 ideas on youtube....a strap looking thingy...but still no go and this tool. I finally bout this tool and the first time I put it on the filter with a breaker bar was the first I had seen it budge! Had it off in 10 minutes!

Susan R Verified Purchase

Bogert Talon Oil Filter Tool

December 11, 2024

Wow! Great tool when all else fails! Took destroyed filter off in less than 5 minutes! Would definitely recommend!

Paul
November 25, 2024

This product works great for aviation and automotive would recommend it to anybody and everybody that has a ripped filter

Darren W Verified Purchase

Bogert Talon Oil Filter Tool

October 22, 2024

Brilliant tool!! It took 10 seconds to remove my destroyed oil filter.

Andrew T Verified Purchase

Bogert Talon Oil Filter Tool

October 2, 2024

Worked as advertised, good quality material use on tool.

Michael L Verified Purchase

Bogert Talon Oil Filter Tool

August 23, 2024

Tool works great

Ronald E Verified Purchase

Bogert Talon Oil Filter Tool

June 8, 2024

Awesome tool that actually WORKS...no gimmicks.

Gregory H Verified Purchase

Bogert Talon Oil Filter Tool

May 31, 2024

Q&A

Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: How long are the bolts? The can on my filter is screwed all the way up the threads on the central screw. Will it go over the screw to reach the holes in the plate?

It comes with 20mm, 3/4, and 1" long bolts that can be used for different applications.

View in Catalog

View Image View in Catalog