Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Nitrogen Accessory Kit
MFR Model# GKNT
- JUMP TO
- Overview
- In The Box
- Reviews
- Q&A
- View in Catalog
Overview
| Intended for customers that already own a nitrogen cylinder. Accessories only. Not for strut use. Max delivery pressure 175PSI. |
In The Box
- HBG-10 - 10 foot blue inflation hose
- TF7146 Heavy duty inflator with straight-in tapered chuck
- 452IN-450-F Nitrogen Regulator, CGA580, 3000PSI inlet, 175PSI max delivery pressure
Reviews
Verified Purchase
Nitrogen Accessory Kit
Verified Purchase
Nitrogen Accessory Kit
Aircraft spruce ordering excellent, this particular product though came cross-threaded on blue hose to the air chuck. I haven’t got around to contacting service yet to see if they can just send a new line yet
Verified Purchase
Nitrogen Accessory Kit
Works great!
Verified Purchase
Nitrogen Accessory Kit
The air charging equipment and guages seemed to be of good quality and worked very well .
Verified Purchase
Nitrogen Accessory Kit
The main valve that connects to the Nitrogen tank works great. The blue hose that connects to the filler gauge is flimsy, short and tangles easily. The nitrogen tank needs to be close to the plane to reach the tires. On larger aircraft, the tank will need to be under the wing to reach the mains. The filler nozzle that connects to the valve stem requires a lot of force to fill a tire. Inner tube valve stems push in when they are empty. It can be tricky to hold the valve stem, filler nozzle and also press the lever to let air out. They should have designed this with a clamp on valve. The gage on the filler is not accurate. It will get you into the ballpark, but another fill gauge is required. Overall the system does what it is supposed to do, but it will be more useful with some mods.
Verified Purchase
Nitrogen Accessory Kit
Of very Poor Quality! Two fitting have come loose posing a Safety hazard. Very disappointed with the quality.
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The regulator will read up to 450 psi in the GKNAT kit. The highest working pressure is about 400 psi.
We sell this primarily for aviation use, however it does not have any specific application and likely be used in many different use cases. We cannot guarantee automotive compatibility but the product itself would be fine in that environment.
The vendor has a C of C, but there is not a FAA-PMA document. This is used on the ground and is not attached to the aircraft so it would not need a PMA.
No, the gauges do not have calibration certificates in the box.
Per Vendor: "the regulator will fit any nitrogen cylinder that has a CGA of 580."
