This tester comes complete with on-off safety valve to eliminate pressure when disconnecting from the cylinder. Can be used to check intake or exhaust valves, cracked or worn rings, defective cylinders, worn bushings, etc. Specifications: Orifice size is .040". precision gauges matched to within +/-2%. 18MM plug adapter. 24" pressure hose. Includes hose and spark plug adapter. Factory calibrated. Letter of certification available upon request. Note: For an engine cylinder having less than a 5.00-inch bore; 0.040-inch orifice diameter; .250 inch long; and a 60-degree approach angle. |
Excellent small bore pressure tester
Diff Cylinder Press Tester <5 Bore
simple to use and works great on my c-85.
Diff Cylinder Press Tester <5 Bore
It works great! Easy to use. I watched UTube on how to do the leak down single handed.. Just move the prop back and forth a little to get a proper pressure.
Diff Cylinder Press Tester <5 Bore
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, this kit includes a case.
The calibration certificate does not come standard with the unit. It can be furnished if requested at time of order.
SB03-3 states that an inspection with a Borescope will be needed with the use of a compression test. This is a compression tester only.