Part No. | Dia. | Length |
---|---|---|
AN426AD-3-3.5 | 3/32" | 7/32" |
These flush head AN426 rivets are ideal for those situations where one length is just too short and the next length is too long. |
Glad to be able to buy 1/8 pound qty of several sizes, just to make sure I end up with the size I actually need. It would be great if you offered an assortment pack in a parts organizer. That would be a big seller, for sure. Oh, of the 6 or 7 bags I bought, one of them (the smallest 3-3 rivets!) was not stapled or taped. Guess which bag I picked up from the bottom. Please be careful closing these bags up...Im still finding them on the kitchen floor.
Great to have these half sizes.
Aluminum Rivet AN426Ad-3-3.5
They provided a riveting performance.
Aluminum Rivet AN426Ad-3-3.5
Aluminum Rivet AN426Ad-3-3.5
Shipped fast! These are great and definitely give me more confidence with the ladies.
Aluminum Rivet AN426Ad-3-3.5
Aluminum Rivet AN426Ad-3-3.5
Perfect for nutplates
Aluminum Rivet AN426Ad-3-3.5
Aluminum Rivet AN426Ad-3-3.5
as advertised
Aluminum Rivet AN426Ad-3-3.5
Aluminum Rivet AN426Ad-3-3.5
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the tech data sheet, the rivets have 100* countersink, and the hard "AD" rivets are made from 2117-T4 aluminum.
Yes, they are priced and sold by the lb. We can sell them in as little as .13 lbs. Enter the quantity with a decimal, so if you want a 1/2 lb, enter the quantity as 0.5.
Approx 1200.
Several tools would be needed. A rivet gun with a flush rivet set, an air compressor, and a bucking bar to start. There are also rivet squeezers, and benchtop rivet fixtures. There are several tools and accessories to choose from.
AD rivets are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI.
This is +/- .010.
|The diameter is .275" and there are no markings on the head.
Approx 306 rivets per 1/4 lb of AN426AD-5-5.
0.13 LBS.
These have a 100 degree countersink.