Description | Part No. | Price | Buy |
---|---|---|---|
Hobbyair I with (Half Mask) 110V | 12-15850 | $471.90 | |
Hobbyair I with (Half Mask) 220V | 12-15860 | $570.90 | |
Hobbyair I with (Full Mask) 110V | 12-15851 | $621.50 | |
Hobbyair I with (Full Mask) 220V | 12-03520 | $671.00 | |
Hobbyair II System Includes 2-40ft Hoses + Half Mask | 09-00633 | $544.50 | |
Hobbyair Buddy System with (2 full facemasks) 110V | 12-05094 | $851.40 | |
Hobbyair Buddy System with 2 Air Supplied Hoods | 12-05624 | $658.90 | |
Hobbyair 1 with Air Supplied Hood 10" Hose | 12-05625 | $473.00 | |
Hobbyair 2 with Air Supplied Hood & 80" Hose | 12-05626 | $577.50 | |
Hobbyair Full Mash & 40" Hose | 12-05627 | $581.90 |
The Hobbyair Pro 1 is a fresh air breathing system specifically designed for the amateur painter which allows only fresh air to reach the user's lungs. It features a comfortable, lightweight facemask with beltline hook, simple snap together fittings, and is very affordable. Includes the pump unit with two stage, single speed, air bypass type motor, mask, belt and 40 foot delivery hose, fittings, filter, cord and case. The Buddy System Hobbyair is designed for two people and includes two 40 ft. delivery hoses. 1 yr warranty. Excellent for use in homebuilt aircraft construction and painting. |
This is a great system to use when painting. Fresh air and it helps keep you cool when all suited up. Only drawback is the hose does coil up on itself. I am storing it all laid out straight but it could up when I am walking around.
Hobbyair I With (Full Mask)
The Hobbyair 1 is a high quality unit made in the US. The half mask is comfortable and the attached rubber hose is a good length, attaching to the clip connect on the belt. The turbine air supply has plenty of volume through the 40 hose. The problem with the product is the 40 clear plastic reinforced supply hose. The plastic material is hard as a rock and doesnt flex or bend sufficiently as you move about. It also tends to coil up on itself and not lay flat. The hose is excessively rated at 200psi, and does not need to be reinforced either. Very frustrating went moving about. Im looking at purchasing the Citation supply hose but I need to confirm it is more flexible. Disappointing hose, otherwise a good product.
Hobbyair 1 With 40 Hose And Half Mask
It is nice having fresh air when I am painting. Having fresh air pumped in sure beats trying to breathe in normal filtered masks.
Hobbyair I With (Full Mask)
I am very pleased with this machine. It was easy to setup and easy to operate. The mask fits well even with my eye glasses. It works like a charm and my breathing issues associated with painting scale models have disappeared for the most part. Just tickled pink with this purchase.
Hobbyair 1 With 40 Hose And Half Mask
Hobbyair 1 With 40 Hose And Half Mask
I paint my own motorcycles parts like tanks,fenders and frames. I build a small paint booth and with this mask and fresh air coming in I smell nothing!! The only issue I have is the mask is a little small but if I use my old glasses I’m ok.
Hobbyair I With (Full Mask)
The ease it is to spray paint now Blows me away!! Visibility Crystal clear Nothing but fresh Air, If you need one Buy it! Im glad I did.
Hobbyair I With (Full Mask)
Excellent looking product Not used yet but turned it on to check moves a lot of air Nice that it’s Made in the USA
Hobbyair 1 With 40 Hose And Half Mask
I purchased this with the half mask so I can use it under my welding helmet in addition to using it for painting. The unit works well and is I think a good value. Seems to provide plenty air flow. It was shipped promptly.
Hobbyair 1 With 40 Hose And Half Mask
Aircraft Spruce delivered the Hobbyair quickly and packaged well. It is exactly as described.
Hobbyair 1 With 40 Hose And Half Mask
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the supplier: The Hobbyair has a HEPA filter. The system is designed to deliver fresh / clean air from somewhere other than the area you are working in. This is why we make our systems with hose lengths from 40 to 160 feet long. If you locate the air pump in fresh air, then, yes, the system will deliver fresh air to your hood or mask all day. The HEPA filter will filter out dust etc. that are in the (fresh) air. I hope that helps.
400 watts would be required to run the system.
No, this is a one person unit with 2 hoses at 40', totalling 80'. The 2-person unit is the Buddy System like part number 12-15870.
Hobbyair 1 has 40' of hose, and the Hobbyair 2 has 80' of hose to the mask.
Yes, you could use it while working with fiberglass.
Per Vendor: "The turbine we use for our respirators has an appropriate (much lower) volume for breathing. Trying to breathe through a sprayer turbine would be very hot and way too much air."
It should work with a goatee, but it would depend on if its extremely long, braided, etc etc. We do have a hood that works with this system, it is part number 12-03319.
Clean with an anti-bacterial soap and allow to dry before storage.
Yes, this has a speed control so can increase the amount of air.