Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Port-A-Blast Sandblaster
MFR Model# 30D
Overview
| The Port-A-Blast sand blast gun is a complete sand blast unit. Fill the container with the abrasive material, connect the gun to your air line and it is ready to go to work. Will operate on air pressure as low as 60 PSI. However, for best results, pressures of 100-500 PSI are recommended. The greater the pressure the faster the cutting. The gun can be used to siphon abrasives or liquids directly from a hopper or bucket, using a flexible siphon tube, and eliminating the 1Qt. container. |
Compatible Abrasives
- Silica Sand - the cheapest and most widely used for average work.
- Glass Beads
- Black Beauty Abrasive
- Aluminum Oxide Abrasives - for fast cutting and fine texturing and etching.
- Nut Shell Abrasives - for cleaning and polishing hard under surfaces without scratching.
- Metal Shot - for removal of hard surfaces such as porcelain.
Reviews
I got a Port-A-Blast and I love it .
Verified Purchase
Port-A-Blast With Ceramic Nozzle
I am so happy to find this nozzle. I have my dads old Port a Blast from who knows how long ago, with a metal syphoning tube and it as been the best sandblaster for refinishing my wood projects. I dropped it a few months back and snapped the nozzle. I had no idea where my dad got his and I was devastated. Nothing has worked like this has. I cant wait to get my new nozzles and finish my projects!!!
This device is excellent. It is a great value. It is very helpful in media blasting large objects that are to cumbersome for an enclosed blaster. I recommend using a remote hopper for providing an adequate supply of media. I recommend this unit.
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The stock units have ceramic nozzles, but we can order the steel nozzles upon request
The I.D. of the nozzle is 3/16", which tapers to a jet that is 3/32". It takes 8.06 CFM to 100PSI.
Per Vendor: I have never been asked this before and am not familiar with the needs for undercoating. I visualize that as a thick tarry substance and if so I doubt that he would be happy with the 30D. It is a good liquid blaster, but that would with things like solvent.
Yes, this will work no problem.
