Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
Clearview Universal Tablet Yoke Mount
Overview
The ClearView Mount is universal because of the following features:
The height adjustment is used to place the iPad in the optimum position for viewing the panel and the iPad’s screen. In addition, the iPad can be rotated 180 degrees to temporarily set it higher during cruise flight when full access to the panel may not be needed. A quick 180 degree flip restores the normal sight line. The iPad is placed into the holder by positioning the bottom of the iPad into the lower L brackets and pressing down to extend the spring loaded mechanism. Then rotate the tablet beneath the upper L brackets. Removal is equally simple and quick. |
Features
- All the required hardware to support different yoke geometries is included.
- High customer satisfaction is assured due to the high level of adjustability to achieve the perfect sight line.
- This mount allows adjustments in height, tilt angle (2 axis), landscape/portrait orientation, and left/right position.
- The tilting and rotation do not require loosening any clamps. T
- The result is that a position can be found for any tablet that provides the pilot a clear view of the screen, while maintaining a clear view of the whole panel.
- The universal tablet holder allows the use of protective cases and folios while retaining the ability to quickly extract the tablet.
- The entire mount comes pre-assembled and may require some simple adjustments to accommodate a specific yoke configuration.
- And the iPad II pencil can be charged on the 11" Pro model while in the holder.
- The holder exposes 70% of the iPad's rear surface allowing native convection cooling.
Specifications
- Yoke diameters up to 1.6" are supported by the aluminum clamp.
Benefits
- This design has been successfully installed in a wide variety of Beech, Cessna, Piper, Mooney, and Commander aircraft from singles to high performance twins.
- Only the included installation kit was needed to accommodate all the models tested.
- In all cases, the tablet could be positioned for easy viewing without blocking anything on the panel.
- All testing was done with both iPad mini's and the larger 11" Pro versions.
- iPads with various protective folios and cases were also tested to assure compatibility.
In The Box
- 1 - Mount
- 1 - Installation Kit
- 1 - Clips (accommodate all sizes of iPads & other tablets)
Reviews
Mounts easy enough...but I havent found a way to prevent rotation of the iPad...there is no tensioner I can find so my iPad tends to flop back and forth and rotate...Ive taken to using rubber bands to tighten things up.
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
