Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
ACK Whip Antenna For E-04
MFR Model# E-04.8
- JUMP TO
- Overview
- Reviews
- Q&A
- View in Catalog
Overview
| E-04 406 ELT whip antenna. |
Reviews
Same antenna as came with my original ELT package purchase. An easy installation.
Verified Purchase
ACK E-04 Whip Antenna
Nice product!
Verified Purchase
ACK E-04 Whip Antenna
The part received from Aircraft Spruce was as expected and required and without faults
Verified Purchase
ACK E-04 Whip Antenna
a perfect replacement for the original antenna
Verified Purchase
ACK E-04 Whip Antenna
This was a replacement for the original that the plastic totally fractured. I live in the northwest, plane always hangared, not left in the sun very often. I think the plastic base was of a poor quality. I also had a failure on my revious ACK ELT. I would buy a different brand next time.
Verified Purchase
ACK E-04 Whip Antenna
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The install manual states that the antenna is to be mounted on top of the aircraft +-35 degrees of vertical when the aircraft is in normal flight attitude.
The supplemental ground plane must have a minimum diameter of 24" however 48 will provide maximum power at 121.5 MHz and is highly recommended. This antenna is 20.625" long.
To comply with the TSO installation instructions the external antenna will require replacement as well.
Approx 21.5 inches
Yes it uses a standard bnc connector and the nut is standard/typical.
Approx 20.5 inches.
Yes, as the new ELTs transmit both 121.5 and 406. however typically ELT antennas should be for the brand ELT that is installed. It is not recommended to use an ACK E-04 antenna for another brand ELT.
