THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | +61 (1800) 953522

Eox Aircraft Hydraulic Fluid Remover - Gallon

$96.75/Gallon
Price Includes GST
Quantity
Add to Wishlist
Part# 09-02453
MFR Model# 2520-120

Overview

eOx Aircraft Hydraulic Fluid Remover (AHFR) is a proprietary cleaner designed to easily remove all hydraulic fluids, baked on carbon, and corrosion protecting compounds. eOx AHFR is an excellent replacement for chlorinated products and solvent based cleaners. eOx AHFR meets AMS–1526B.

Features

  • Non-toxic
  • Non-flammable
  • Non-hazardous – Not subject to dangerous goods regulations.
  • No phosphates, acids or silicones
  • High biodegradability (tested by the University of Ghent, Belgium)
  • Neutral pH of 6-8
  • Very economical to use.
  • Contains no phosphates, acids, silicones and is non-butyl.
  • Fast, intense cleaning action surpasses other cleaners’ performance.
  • Can be effective used as a spray-on & wipe-off process.
  • Safe for use in high-pressure washers, immersion systems and ultrasonic machines.
  • Fresh smell – NOT citrus

Directions for Use

  • Spray eOx AHFR on the surface to be cleaned. Scrub the area with a brush.
  • Depending on the level of contamination, let the product work for 1 to 15 minutes maximum.
  • Scrub the area again with a brush.
  • Rinse the area with water to remove the residue.
  • Repeat if necessary.
  • RPM Technology recommends treating the entire aircraft with the eOx Aircraft Cleaner (AC). This product completely removes any residue of the eOx AHFR. Furthermore, will create an anti-static layer on the surface so that the adherence of new hydraulic oil deposits is reduced and successive cleaning easier.

Application

  • eOx AHFR is specially developed to remove sticky hydraulic oil deposits from the aircraft fuselage, wheel wells, landing gear, wings, and any area or part where hydraulic fluid accumulates. eOx AHFR also removes numerous oils, greases and stubborn carbon deposits; especially from around engine exhaust areas. eOx AHFR is ready to use and intended as a spot cleaner on the aircraft.

Properties

  • NFPA Hazard Class: Health 1
  • Flammability 0
  • Reactivity 0
  • VOC: < 20 Pa
  • pH: >6 <8
  • Flash point: >212°F/100C
  • Do not store under 35°F/2C and not above 122°F/50C. Do not use below 35°F/2C.

Reviews

Q&A

Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

View in Catalog

View Image View in Catalog