LPS 3 Premier Rust Inhibitor is a specially formulated long-term corrosion inhibitor protecting metal parts in inside storage for up to two years. When applied it forms a soft, transparent, waxy film sealing out moisture, air, acid, alkali fumes, and other corrosive elements. |
Appearance/Physical State: | Cloudy/Liquid |
---|---|
Odor: | Mild. Cherry |
Melting Point/Freezing point: | Not Available |
Boiling Point/Range Aerosol: | Not Available, Bulk: 320°-392°F |
Vapor Pressure Aerosol: | Not Available, Bulk 2.6 mm Hg @20°C |
Partition Coefficient: | Not Available |
Percent Volatile Aerosol: | 63-82 %, Bulk: 78.45% |
Flammability Limit: | Lower 0.6, Upper 6% |
Propellant Aerosol: | Carbon Dioxide, Bulk: N/A |
VOC Content Aerosol: | 62.8%, Bulk: 75.58% |
Color: | Brown |
Flash Point: | Aerosol 64.4°F, Bulk 104.5°F |
Relative Density: | Not Available |
Evaporation Rate: | Aerosol - 151 (Ethyl Ether), Bulk: 0.2 (butyl acetate=1) |
Vapor Density: | Aerosol: Not Available, Bulk 4.8 |
Auto-Ignition Temperature: | 446°F (230°C) |
Viscosity: | Aerosol-Not Available, Bulk: 20-550cP |
Specific Gravity (water=1): | Aerosol: 0.87, Bulk: 0.81 |
Temperature Range °F(°C): | Not Available |
4-Ball Weld Load: | Not Available |
Product works as advertised
LPS 00316 #3 Premier Rust Inhibitor 11Oz Aerosol
Good stuff
LPS 00316 #3 Premier Rust Inhibitor 11Oz Aerosol
Great stuff usable almost everywhere
LPS 00322 #3 Premier Rust Inhibitor 20 Oz
a good product
LPS 00316 #3 Premier Rust Inhibitor 11Oz Aerosol
LPS 00316 #3 Premier Rust Inhibitor 11Oz Aerosol
LPS 00316 #3 Premier Rust Inhibitor 11Oz Aerosol
LPS 00322 #3 Premier Rust Inhibitor 20 Oz
In previous use, LPS3 has provided excellent protection of bare cast iron and steel tools & equipment left outdoors year round in harsh weather . Has also provided very good protection used as vehicle rust protection on heavily salted roads here in eastern Ontario.
LPS 03128 #3 Premier Rust Inhibitor Gallon
Good product to keep in the hangar for a good lubricant and to fight rust
LPS 00316 #3 Premier Rust Inhibitor 11Oz Aerosol
👌👍👌👍👌👍👌
LPS 03128 #3 Premier Rust Inhibitor Gallon
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, it meets MIL-PRF-16173E Grade 2 Class 1. Please see the Approvals tab for additional spec info.
LPS 3 cannot be used in the manner described. It can be applied to a dry, rusted surfaces that has had any loosely adhered corrosion removed. It will not convert the rust but will halt further corrosion from occurring. It cannot be painted over.
I believe it would be safe, but it is brown in color and could stain the paint. I would not recommend it for this application.
This product is a common use product, not aviation specific. It does not have a specific approval application guide. You would need to check your engine manual for storage procedures.
Per the manufacturer: it is possible that LPS 3 could transfer to other substrates and the petroleum components could affect some finishes.
Shelf life is 1825 days.