Description | Aircraft Model | Part Number | Price | Buy |
---|---|---|---|---|
Fuel Tank Structural Screw Kit - Stainless | Cessna 150/152 (Standard) | 04-01005 | $52.75 | |
Fuel Tank Structural Screw Kit - Stainless | Cessna 150/152 (Long Range) | 04-01004 | $71.45 | |
Fuel Tank Structural Screw Kit - Stainless | Cessna 172 (Standard) | 04-01003 | $94.33 | |
Fuel Tank Structural Screw Kit - Stainless | Cessna 172 (Long Range) | 04-02068 | $103.13 | |
Fuel Tank Structural Screw Kit - Stainless | Piper PA28 Cherokee (Standard) | 04-01002 | $116.44 | |
Fuel Tank Structural Screw Kit - Stainless | Piper PA28 Cherokee (Long Range) | 04-01001 | $117.43 | |
Fuel Tank Structural Screw Kit - Stainless | Cessna 150 Aerobat | 04-01006 | $35.48 | |
Fuel Tank Structural Screw Kit - Stainless | Cessna 150/152 (66-77) | 04-01008 | $29.98 | |
Fuel Tank Structural Screw Kit - Stainless | Cessna 170AF | 04-01009 | $32.73 | |
Fuel Tank Structural Screw Kit - Stainless | Cessna 182 | 04-01011 | $38.50 | |
Fuel Tank Structural Screw Kit - Cadmium | Piper Cherokee 140/50/60/80/235 | 04-01015 | $29.70 |
Fuel Tank Structural Stainless Screw kits. Price per tank. |
These are structural stainless screws and needed if you dont want your newly painted wings to get rust stains.
Stainless Steel Screw Kit Fl Tk 172
C150 1967-77 Stainless Steel Fuel Tank Kit
Stainless Steel Screw Kit Fl Tk 150/152
Pip Cherokee 140 Cadmium Fuel Tank Kit
Stainless Steel Screw Kit Fl Tk 150/152
They are round on top and pointy on the bottom. Yes, I purchased some structural screws! Remember: you’ll need a bag per wing and don’t look for the ones that go around the fuel cap. You’ll need to order those separately. I could go into the dissertation about how things in aviation cost more than they should… But the quality here was good, and it was “expected pricing” when considering it goes on an airplane
Stainless Steel Screw Kit Fl Tk 150/152
These screws will save grief and hundreds of dollars over fighting rusty originals, and will retain their strength.
Came as described. Needs an option for the long range tanks or at least a note telling you to order two kits if you have the big tanks
Just what I wanted A++++
Better than factory new!
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
These kits are priced and sold per tank.
Per Vendor: There are 87 screws per tank. There is 4 different sizes all 8-32 thread with the ending dash number -0812, -0809, -0808, -0807. These screws are all 125,000 tensile strength. The FAA-PMA approval does not apply because these are MS screws.
Per vendor: These are not included in the kit. We can help you however and include them, just give us the size and how many you need when placing your order and we will do it as a special order to accommodate our customers.
Plastic washers are not supplied this is just the screw kit. You would need to check your aircraft parts manual to see if plastic washers were used in this application.
MS27039C0806 x 10
MS27039C0807 x 7
MS27039C0808 x 25
MS27039C0812 x 3