Senders, clamp type senders with 3/16" diameter probe. 1" long tip. Note: Westberg 712 Series Thermocouples are for Non-TSO’d CHT & EGT Gauges only. They have two small pins which are the same size. "K" wire EGT sender, 1-5/8" to 2-1/2" clamp, 1" tip, 4' lead, grounded tip Made in USA |
Easy to install, plugs right in to the existing leads, and worked great today
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
My existing probes were 40 years old and failing! These new probes have me up and running again.
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
The probe was easily installed and worked properly. The only issue is that it historically does not last but a couple of years and has to be replaced.
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
fit perfect with slight modifaction
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Product arrived as expected, tested ok.
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Called for part, works well
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
should work just fine
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Works well. Easy to install. Thought it was a little pricey as compared to 3 yrs ago. But so is most everything to do with an airplane.
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, this sender and instrument are compatible.
See part # 10-01225.
Per Westach : The 713 series thermocouples were part of a FAA TSO certified system made by Westberg Mfg., Inc. Westerg Mfg no longer make sell or service these certified systems. They do not have a certified replacement for this sender.
This sender is not FAA Approved. 8130-3 is not available on this item.