+61 (1800) 953522 | info@aircraftspruce.com.au
Aircraft Spruce Australia
Melbourne, VIC Australia
 
 
THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | +61 (1800) 953522
Home / Airframe Parts / Cessna Parts / Seat Components /Seat-KT-2 Standard Seat Kit
Main Image
Main Image
Thumbs 1
Thumbs 1

Seat-KT-2 Standard Seat Kit

5 Reviews 3 Answered Questions
$179.14/Each
Price Includes GST
Quantity
Add to Wishlist View More In This Series →
Part# 05-00427
MFR Model# SEAT-KT-2
ModelDescriptionPart Number
Seat Kit 2Standard Seat (1 or no crank handles) Contains 8 Washers, 4 Rollers, 4 Bushings05-00427

Overview

These FAA-PMA replacement seat parts were developed to assist in complying with parts replacement requirements of A.D. 2011-10-09. This A.D. requires the periodic inspection and replacement of the seat components of the entire Cessna light aircraft fleet. These parts are direct replacements for the wear-related seat components.

All rollers are fully machined from extruded stock for a finer surface finish and higher strength. The bushings are machined from alloy steel for longer life and greater wear resistance. The wear washers are made from a super tough acetyl plastic and have far better wear properties and resistance to aging.

The seat related replacement parts are not serial number specific as the type of seat installed in the aircraft was optional when the aircraft was ordered from the factory. A common seat configuration is the pilot seat being "articulating" or "infinitely adjustable" while the co-pilot seat is the "standard" or "vertically adjustable style".

  • Seat Kit 1:
    This kit is used with the infinitely adjustable or articulating seats installed in the Cessna single engine aircraft from 1963 through 1986. Two adjustment crank handles identify this seat. The backrest angle is adjusted with a crank. It is also used with some 336-337 series aircraft. The SEAT-KT-1 contains the same components as four of the Cessna 1714000K200 kits.

    All seats in the 177 Cardinal will use the large seat roller and require this kit. These parts are not used on models 150-152.

  • Seat Kit 2:
    This kit is used with the Standard or Vertically adjustable seat installed in Cessna single engine aircraft from 1963 through 1986. This seat is identified by one or no adjustment crank handles. The seat back angle is adjusted with a lever on the side of the seat back. It is also used with some 336-337 series aircraft. The SEAT-KT-2 contains the same components as four of the Cessna 1414100-212 kits.

    These parts are not used on models 150-152.

  • Seat Kit 3:
    This kit is used with all seats in the Cessna 150-152 series aircraft, and all Cessna single engine aircraft built before 1963. A welded steel tubing seat frame easily identifies these seats. It is also used with some Cessna twin engine aircraft.

Documents

Reviews

Submit a Review

worked perfect

Kurt F Verified Purchase

Seat-KT-2 Standard Seat Kit
February 27, 2023

Hello we are missing certificates for this

Mms C Verified Purchase

Seat-KT-2 Standard Seat Kit
May 19, 2022

Perfect! Easy to install on my 1968 172i. Smooth rolling again! …Dane

Dane L Verified Purchase

Seat-KT-2 Standard Seat Kit
September 18, 2021

this product arrived very fast and fits perfect.

Gary P
June 26, 2020

Made a huge difference, didn’t give it 5 stars because as good as it worked that’s a lot of money for what it is...

Alan B
February 16, 2019

Q&A

Submit

Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Are these parts usable I certified aircraft (PMAd, TSOd, etc)?

Yes, these items are FAA PMA Approved.

Q: Do the large washers on either side of the roller (whited out in the picture) come with the kit? If not, can I order those also?

They are included in the kit.

Q: Are the bolts and nuts included in the kit?

Not in this kit. These have the bushings, rollers, and washers.

View in Catalog

View Image View in Catalog