Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Andair FX375-Mk Filter
MFR Model# FX375-MK
| Description | PN |
|---|---|
| FX375-MK Cleanable Fuel Filter for 3/8" Fuel lines | 05-12560 |
Overview
FX375-MK Cleanable Fuel Filter for 3/8" Fuel lines (NPT male output):
Fittings: AN-6 male input, 1/4 NPT male output. Negligible pressure drop Weight 60g FX500-MK Cleanable Fuel Filter for 1/2" Fuel lines (NPT male output):
Fittings: AN-8 male input, 3/8 NPT male output Negligible pressure drop Weight 75g |
Specifications
- Weight 60g
Reviews
Better than the 10 micron filter that got plugged with no visible residue in the filter.
Verified Purchase
Andair FX375-Mk Filter
Its a great filter, but, you need to be aware of a few things. First, it requires the use of a 16mm wrench. If you use an SAE wrench youll mess up the hex fittings. Second, replacement o-rings are not, at the time of this writing, available from Aircraft Spruce. They really should sell these, as disassembly for inspection could damage the existing o-ring and you definitely want spares if youre going to open and inspect the filter as recommended. So if you use this filter, order spare o-rings from Andair or elsewhere to ensure you have them. The product itself is great, but you need to prepare yourself if you use it.
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per Vendor: The filters length is 106mm and the diameter is 35mm. They're both the same with the exception of the inlet/outlets which are either 3/8" or 1/2".
No, part number 05-12560 has 3/8" flare one side and 1/4" NPT on the other.
As long as there are no obvious tears or weak points in the mesh, continuous cleans should be okay.
Inspection and subsequent clean after the first hrs flight, then 5 hrs then 25 hrs are recommended.
No. These are not approved for use on a certified aircraft.
Aluminum.
62 micron.
The filters length is 106mm and the diameter is 35mm.
