+61 (1800) 953522 | info@aircraftspruce.com.au
Aircraft Spruce Australia
Melbourne, VIC Australia
 
 
THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | +61 (1800) 953522
Home / Tools / Inspection Equipment / Leak/Crack Detection /Met-L-Chek Penetrant Vp-30
Main Image
Main Image
Thumbs 1
Thumbs 1

Met-L-Chek Penetrant Vp-30

2 Reviews 0 Answered Questions
$18.15/Each
Price Includes GST
Quantity
Add to Wishlist
Part# 09-04320
MFR Model# M-VP-30-16

Overview

VP-30 is a visible (Type 2), water washable (Method A) and solvent removable (Method C) inspection penetrant. It is designed for use in general metalworking, welding, nuclear and automotive applications for surface flaw and through leak detection. VP-30 has found wide use in the inspection of food and dairy processing equipment such as heat exchanges. Visible penetrants are not rated by sensitivity levels per AMS-2644 but are considered approximate to level 1 fluorescent penetrants. 50µ discontinuities are readily detected and under controlled conditions 30µ size defects may be high lighted by visible penetrants. ISO-3452-2005 does rate visible penetrants by sensitivity level with #2 being the most sensitive. VP-30 is a level 2 per this specifications requirements.

VP-30 is listed on the Qualified Products List for AMS-2644E. It meets the requirements of ASME Boiler and Pressure Vessel Code, ASTM E-165, ASTM E-1417, and ISO- 3452-2005 for penetrant inspection materials. It is low in Sulfur, Chlorine, Fluorine and other Halogens, making it safe for use on Titanium and high Nickel alloys found in aerospace, medical and nuclear components.

Guide to METHOD "C" wipe off processing per ASTM E-1417-05
  1. Part must be clean, dry and at a temperature of 4.4°-52°C (40°- 125°F) before penetrant is applied.
  2. Apply penetrant using spray, immersion, or wipe on.
  3. Wait a minimum of 10 minutes; 20 minutes if temperature is 4.4°-10°C (40-50°F).
  4. Moisten cloth with remover and wipe penetrant from surface. Do not spray remover on surface to remove penetrant, as sensitivity will be impaired.
  5. Apply nonaqueous developer D-70, by spraying.
  6. Wait a minimum of 10 minutes before inspection.
  7. Use lighting of 1100 lux/m2 (100 footcandles) minimum.

Physical Properties

  • Form: red liquid
  • Density: 801 g/L
  • Flash Point: >62.2°C (>144°F)
  • Viscosity: 2.4 mm2/s
  • Water Tolerance: > 5%
  • Corrosion of aluminum: none
  • Corrosion of carbon steel: none
  • Corrosion of magnesium: none
  • Corrosion of stainless steel: none
  • Corrosion of titanium: none
  • Chloride content: < 50 ppm (< 0.005%)
  • Fluoride content: < 50 ppm (< 0.005%)
  • Sulfur content: < 150 ppm (< 0.015%)
  • Mercury: none
  • VOC's: 533 g/L
  • Ozone layer depleting substances: none
  • PCB's: none

Specifications

  • AMS-2644E
  • ASME B & PV code 07 sec V
  • ASTM E-165
  • ASTM E-1417
  • Dassault IQ-1-0-1-20
  • ISO-3452-2005
  • NAVSEA-T9074-AS-GIB-010/271
  • PMUC
  • RCC-M rev 2000

Documents

Reviews

Submit a Review

Works great , follow the directions

Jeffrey W Verified Purchase

Vp-30 Penetrant Mil-I-25135E
October 22, 2021

Works great , follow the directions

Jeffrey W Verified Purchase

Vp-30 Penetrant Mil-I-25135E
October 22, 2021

Q&A

Submit

Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

View in Catalog

View Image View in Catalog