LPS 3 Premier Rust Inhibitor is a specially formulated long-term corrosion inhibitor protecting metal parts in inside storage for up to two years. When applied it forms a soft, transparent, waxy film sealing out moisture, air, acid, alkali fumes, and other corrosive elements. |
Appearance/Physical State: | Cloudy/Liquid |
---|---|
Odor: | Mild. Cherry |
Melting Point/Freezing point: | Not Available |
Boiling Point/Range Aerosol: | Not Available, Bulk: 320°-392°F |
Vapor Pressure Aerosol: | Not Available, Bulk 2.6 mm Hg @20°C |
Partition Coefficient: | Not Available |
Percent Volatile Aerosol: | 63-82 %, Bulk: 78.45% |
Flammability Limit: | Lower 0.6, Upper 6% |
Propellant Aerosol: | Carbon Dioxide, Bulk: N/A |
VOC Content Aerosol: | 62.8%, Bulk: 75.58% |
Color: | Brown |
Flash Point: | Aerosol 64.4°F, Bulk 104.5°F |
Relative Density: | Not Available |
Evaporation Rate: | Aerosol - 151 (Ethyl Ether), Bulk: 0.2 (butyl acetate=1) |
Vapor Density: | Aerosol: Not Available, Bulk 4.8 |
Auto-Ignition Temperature: | 446°F (230°C) |
Viscosity: | Aerosol-Not Available, Bulk: 20-550cP |
Specific Gravity (water=1): | Aerosol: 0.87, Bulk: 0.81 |
Temperature Range °F(°C): | Not Available |
4-Ball Weld Load: | Not Available |
In previous use, LPS3 has provided excellent protection of bare cast iron and steel tools & equipment left outdoors year round in harsh weather . Has also provided very good protection used as vehicle rust protection on heavily salted roads here in eastern Ontario.
LPS 03128 #3 Premier Rust Inhibitor Gallon
👌👍👌👍👌👍👌
LPS 03128 #3 Premier Rust Inhibitor Gallon
Have been using this product to rustproof the underbody of my cars with great results. Applies easily with hand sprayer and doesnt wash off easily with rain/snow/sleet. Highly recomment.
LPS 03128 #3 Premier Rust Inhibitor Gallon
Excellent produit contre la corrosion. Nous lutilisons depuis plus de 20 ans sur nos véhicules et aucune rouille nest apparu.
LPS 03128 #3 Premier Rust Inhibitor Gallon
According to the expert testers this is supposedly one of the better rust inhibitors . Thanks for offering this product to the general public.
LPS 03128 #3 Premier Rust Inhibitor Gallon
I wanted to ask someone today during the pickup...did not, so I will ask now: I plan to use this for the undercarriage of my SUV. I did a lot of research but just want to know what you think of this. I sometimes power wash the undercarriage (when I think SALT has accumulated) and I wonder what you think about LPS 3 standing up to this...just the ocassional power wash. Or is it better to rinse the undercarriage with a normal hosing?
Easy to apply and dries fast
used this product for the past 30 years. Works great and would highly recommend it to anyone trying to control rust. Super product.
I use as rustproofing car drame ans its the best off the world!
Been using LPS 3 for almost 10 years. Best rust inhibitor money can buy. And best of all, it really does what is says it can do. Stays on and is not washed away by rain or slush.
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, it meets MIL-PRF-16173E Grade 2 Class 1. Please see the Approvals tab for additional spec info.
LPS 3 cannot be used in the manner described. It can be applied to a dry, rusted surfaces that has had any loosely adhered corrosion removed. It will not convert the rust but will halt further corrosion from occurring. It cannot be painted over.
I believe it would be safe, but it is brown in color and could stain the paint. I would not recommend it for this application.
This product is a common use product, not aviation specific. It does not have a specific approval application guide. You would need to check your engine manual for storage procedures.
Per the manufacturer: it is possible that LPS 3 could transfer to other substrates and the petroleum components could affect some finishes.
Shelf life is 1825 days.