THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | +61 (1800) 953522

Alcor 46149 EGT With Light 2 1/4

$418.00/Each
Price Includes GST
Part# 10-03859
MFR Model# 46149

Overview

Alcor EGT gauges are aircraft quality gauges which will provide precise monitoring of engine temperatures. PMA/FAA approved.

Click here to download the manual in PDF.

Features

  • The best value in the industry backed by a generous 3 year warranty
  • Save on fuel costs through precision leaning—running as little as 100° too rich can cost $1,000 in wasted fuel over 100 hours
  • Quick visual reference to peak EGT
  • Set reference to peak EGT where you want with easy in-flight calibration—special screwdriver included
  • No risk of malfunction during electrical failure—requires no external source of power for operation
  • Attention homebuilders—easy installation with no electrical system required
  • Designed to provide temperature compensation for accurate readings year round, on the ground and at altitude
  • All necessary mounting hardware included
  • Alcor instruments are designed, manufactured, and supported in the U.S.A.

Specifications

  • Type: K - Red and Yellow
  • Size: 2-1/4" diameter
  • Resistance: Scale 1600F at 3.63 Ohm
  • Weight: 0.2 lbs
  • Single indicator calibrated for 90" lead (recalibration for other lead lengths possible)
  • Hash marks with asterisk at 4/5 scale

Reviews

Good product but I wanted to clarify that the install requires a very specific hole size of #30 drill bit-to hone. If you are replacing an EDI (or other non Alcor probe), and you have a hole larger than #30 drill, you will need an adapter for this.

Ernie
January 27, 2021

Hi All, The item arrived much quicker than I was expecting & has been fitted, test flown & found to be working just fine. Thanks for your prompt action and supply of a good product. Regards, Steve.

Steve L
June 29, 2020

So far very happy with the purchase, installed without issue and price was reasonable.

Cindy
September 3, 2019

After installing the gauge and prior to putting everything back, I ran the engine for a test. At first the dial did not move so I thought it inoperative. Then I revved the engine past idle and it came up. I have yet to fly with due to other concerns but I feel it will be fine.

Fred H
February 9, 2019

These instruments work great for our test stand applications. Unfortunately I have discovered that we do not get our school discount when I order direct on-line. In order to get this discount, I must call in our orders, which adds time and inconvenience. Fortunately the phone order staff are always great and very helpful.

Letourneau U
May 17, 2021

Q&A

Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Does All necessary mounting hardware included mean that probes are included, too?

The Alcor 2-1/4 Inch EGT Meter does not come with any probes.

Q: What P.N Type K EGT probe goes with this gauge?

The part number 86255 would be the applicable probe for this instrument.

View in Catalog

View Image View in Catalog