These portable power supplies are an excellent way to power your avionics on the ground while you train or practice in the cockpit. Especially helpful in learning how to operate glass cockpit avionics and panel mount GPS units. To use the Portable Power Supply plug the cord into an AC wall outlet, and then connect the 3-pin plug into the external power receptacle on your aircraft. Furnished with Cessna style 3-pin plug. Manufactured in U.S.A. This unit can also be used as a battery charger, by using the battery clip adapter which is provided with the unit. |
Works fine for my c172 12v system. Downloaded datalogs from my avidyne IFD to send to avidyne for analysis. Took about 25 minutes on ground power. Good unit!
12V Port Power Supply 25 Amp Cess Plg & Battery Clips
12v, 25 A power supply works as advertised.
12V Port Power Supply 25 Amp Cess Plg & Battery Clips
Works perfectly to power all my avionics on the ground.
12V Port Power Supply 25 Amp Cess Plg & Battery Clips
Works great
12V Port Power Supply 25 Amp Cess Plg & Battery Clips
Just what we needed to power up our avionics and practice with them on the ground.
12V Port Power Supply 25 Amp Cess Plg & Battery Clips
Works great. Powers up everything.
12V Port Power Supply 25 Amp Cess Plg & Battery Clips
12V Port Power Supply 25 Amp Cess Plg & Battery Clips
Works great! Charges my battery and upon reaching full charge it goes automatically into maintenance mode. Mine services flood batteries, as well as AGM/GEL batteries (like the one in my aircraft).
Super happy with this power supply plug. Our intended use is for training on new avionics in the hangar. Works great, price is right.
Although I was only going to be using this unit as a power source so that I could run my new all glass panel on the ground, I read the previous reviews that talked about static in the audio when using the system. Since that did not apply to me I bought it anyway and use it as I intended to up grade the software without running down my battery. I have found however that I have NO static or audio problems when using this unit like some others have reported. Works great, I love it!
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This is a 12V / 25 Amp battery charger. We requested the information from the manufacturer and they directed us to the specification sheet. You can find this in the "Documents" tab or by clicking here.
Yes, see our part # 11-03158 for the plug only.
No, the 12 volt version can be used on 14 volt systems without damaging the system. Same goes for 24 volt version on 28 volt aircraft systems.
The three port adapter will power the panel, the alligator clips will charge the battery but will not do crank assist.
It is 120 or 240, it is auto sensing.
Yes the battery clip adapter is included.
Cyclic voltage for flooded batteries is 2.47v and 2.4v for agm and gell batteries.
Yes, this fits the 3 pin auxiliary power port on most Cessna aircraft.
It will work with any aircraft that has the cessna style plug. We recommend checking the charger port on your aircraft to see if it has the 3 pin style Cessna style receptacle.