Replacement Bulb for the the Flight Strobe FS-4400. |
The strode was off for 6 months and it still gave me a good shock when I replaced the bulb. Lol I find the builds dont last long about 2 years.
Repl Bulb # Fs-227 14V/28V
Repl Bulb # Fs-227 14V/28V
As specified, would purchase again. As always...fast, reliable shipping.
Repl Bulb # Fs-227 14V/28V
works great
Repl Bulb # Fs-227 14V/28V
The bulb was exactly what I needed. Works great 👍
Repl Bulb # Fs-227 14V/28V
Bulb arrived on time and worked perfectly. Was in a plastic bag and could have been crushed so one star less for packaging. Note clips that held old bulb had oxidized and needed burnishing before inserting and may have caused the failure. bulb.
Mine arrived and worked perfectly. I suggest removing the entire strobe and removing and replacing the bulb inside at your bench. Use gloves and dont touch the bulb with bare fingers. Oils shorten the life. Sometimes the clips have to be burnished to make good contact after years of use. I have seen a strobe bulb fail due to a slight resistance arc and heating at the clip. . Why not 5 stars? Bulb should be in a box from the factory not just a plastic bag - or wrapped in foam then in the plastic bag.
Not sure if it’s a bad bulb or the unit itself but it didn’t work. So I can’t comment on the quality. The packaging was fine and legs weren’t broken.
The middle wire on both bulbs fell off when trying to install.
Repl Bulb # Fs-227 14V/28V
An inferior, poor quality product. The ground leg breaks off with a gentle touch
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.