Designed for standard electric trim servos, the Safety-Trim Intelligent Servo Controller (Safety-Trim) is an electronic speed control system for experimental aircraft. Safety-Trim provides the directional switching function as well as the adjustable speed control function needed to drive electric trim motors with a time limited operation of the trim servo motors that reduce the possibility of run-away trim and failure to operate conditions. Safety-Trim is an important safety feature that is short circuit proof and reverse polarity protected. 2 speed preset models are set for high and low speed trim actuation that allow separately adjustable trim speeds for different flight configurations. The single axis heavy-duty model is for DC trim motors and linear actuators rated for operation at 12 volts and up to 10 amp. |
Input Voltage | 10 – 30 volts DC |
---|---|
Output Voltage | User adjustable 6-12 volts DC, 1 amp maximum |
Inputs | Trim switch inputs, closures to ground pilot/co-pilot switches wired in parallel 2 speed switch, closure to ground |
Output | Time limited, controlled DC voltage to servo Time limit factory set to 3 seconds |
Wiring | Standard 15-pin D-sub connector (male on controller) pre-made wiring harness with ON/OFF/Reverse switch available |
Enclosure | Overall dimensions 5.7” x 2.5” x 1.5” UL 94V-0 rated material, 60°C max temperature |
Weight | 6 oz. |
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.