It’s not easy to make a perfect instrument hole, but this tool will make it a snap. It’s a punch made out 4140 tool steel that has been hardened and precision ground to produce clean, flawless holes in aluminum up to 1/8” thick. Dual reversible design for punching both 2-1/4” and 3-1/8” holes. |
Good material a d workmanship
ATS Instrument Hole Punch 2-1/4 & 3-1/8
This Hole Punch works great, easily punches through tenth-inch aluminum for instrument panels. Makes nice, clean edge cuts.
ATS Instrument Hole Punch 2-1/4 & 3-1/8
High quality, works as described.
ATS Instrument Hole Punch 2-1/4 & 3-1/8
One of the best tools ever made regarding panel upgrades or new builds no matter what this is the way.
ATS Instrument Hole Punch 2-1/4 & 3-1/8
Works great. Very clean holes, perfectly sized. Quality tool.
ATS Instrument Hole Punch 2-1/4 & 3-1/8
ATS Instrument Hole Punch 2-1/4 & 3-1/8
Works well. What seems to work best is continue to tighten the nut until you hear two. I use it in combination with a hole jig.
ATS Instrument Hole Punch 2-1/4 & 3-1/8
Works good, lube threads and connect surface of nut before use
ATS Instrument Hole Punch 2-1/4 & 3-1/8
Very nice tool and fits my needs
ATS Instrument Hole Punch 2-1/4 & 3-1/8
👏🚶👍👌
ATS Instrument Hole Punch 2-1/4 & 3-1/8
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This tool can punch through aluminum up to 1/8 inch (.125).
This tool is designed to be used with aluminum panels. I would suggest a hole saw with teeth to cut the material.
This hole punch can get through aluminum up to 1/8" (.125) thickness.
The diameter of the center bolt is .625".
Yes, it is a reversible cutter for both 2-1/4" and 3-1/8" instrument panel holes.
See our mounting hole template, part number 12-14600.
No, the manufacturer does not supply instructions with this tool.
Yes it can. As long as you want to make the hole bigger.