Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Warp Drive Left Hand Blade Only
MFR Model# 3185
| Description | Rotation | Part Number |
|---|---|---|
| WARP DRIVE LH BLADE ONLY | COUNTER CLOCKWISE | 15-06807 |
Overview
|
Warp Drives Advanced Composite Carbon Fiber replacement propeller blades have a structural strength near that of metal propellers. Because of the stiffness achieved by using carbon fibers, the prop will do very little coning (bending forward) under power. Proper fiber placement allows the prop to flex torsionally for maximum cruise efficiency. The strongly fixed position of the blades along with optimum torsional performance translates into more thrust than conventional propellers.
The interior structure of this new propeller is all carbon fiber - no fiberglass, no foam, no filler - an all carbon fiber matrix combined with top quality hybrid epoxies. Carbon fiber is one of the strongest building materials available. When properly engineered, carbon fiber can achieve the strength and stiffness of a metal part, as demonstrated by its wide range of industrial and aerospace uses. |
Reviews
works great, easy to use. I was able to change my prop pitch by 2.25 degrees without removing the prop and found very numbers for each blade.
Purchased the Warp Drive Protractor to check and verify that the pitch of my Sensenich ground adjustable prop was equal on both sides. I discovered there was a 5 degree difference! With the protractor I was able get both blades adjusted to the same angle. The protractor did its job easily without any problems. I recommend this necessary tool to anyone with a ground adjustable prop.
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
These blades are priced and sold individually. One blade for the price. If you are interested in purchasing more than 1 blade, please contact sales at 877-477-7823 or by clicking the "Contact Us" link in the top right corner of the web page. Special quantity discounts can be arranged.
No, adding nickel edge protection will incur an additional charge. Please contact our sales department for current pricing on adding nickel edge protection to the blades.
The HP blades (High Power) are typically used for all direct drive aircraft engines such as all Continental or Lycoming engines and auto conversion engines that are 100hp and above.
Warp Drive does not have a give an overhaul date based on hours. Overhaul is based of visual inspections set by the manual.