Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
42525 Alcor EGT Type K 90
MFR Model# 42525
- JUMP TO
- Overview
- Reviews
- Q&A
- View in Catalog
| Type | Description | Part Number |
|---|---|---|
| EGT Leads, Type K | 42525 Alcor EGT Type K 90 | 42525 |
Overview
|
Alcor Multi-Probe Analyzers provide the peace of mind pilots want whether they are flying over mountains, oceans or just around home. By monitoring temperatures in each cylinder, a pilot has all the information necessary to safely and accurately tune and monitor the engine for desired performance and reliability. A single probe system is good, but with a multi-probe installation you can lower your flying costs by leaning for best economy which is important in these days of rising fuel costs. What about troubleshooting benefits? High performance aircraft with limited cooling can also benefit from monitoring all Cylinder Head Temperatures (CHT). Engine controls and aircraft attitude can then be correctly set to avoid shock cooling while descending and overheating while climbing. Of all the instruments in your panel, an Alcor analyzer will save you more money than any other and perform as designed for many years to come. The peace of mind is free! |
Reviews
Not the most exciting purchase, but it did include a nice snakeskin protector for the wire junctions.
Verified Purchase
42525 Alcor EGT Type K 90
Needed the wire for my get gauge. Fit was really good
Verified Purchase
42525 Alcor EGT Type K 90
Well put together lead, quality workmanship.
Verified Purchase
42525 Alcor EGT Type K 90
Everything went well.
Kit was as advertised and everything I expected. Came with all necessary hardware and installation instructions. Alcor has their number listed on all the paper work, and I was even able to call them and have a technicals question answered- that was very nice. It’s basic- but works.
Good product but I wanted to clarify that the install requires a very specific hole size of #30 drill bit-to hone. If you are replacing an EDI (or other non Alcor probe), and you have a hole larger than #30 drill, you will need an adapter for this.
Hi All, The item arrived much quicker than I was expecting & has been fitted, test flown & found to be working just fine. Thanks for your prompt action and supply of a good product. Regards, Steve.
So far very happy with the purchase, installed without issue and price was reasonable.
The probe was easy to install on the exhaust. All that was needed was a screwdriver. Connect to the leads and gauge and you are done.
The leads worked perfectly with the probe. After connecting them to the probe, they were inserted through the firewall and then to the gauge. All too easy.
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The large ticks are at 100 degree each starting as 1200F and the small ticks are 25 degrees each.
This unit uses a 3 1/4 - 3 1/8 hose clamp. Please check with your local Aviation office to see if this PMA is ok for your aircraft.
Type j and type k thermocouple leads are two different alloys that react with one another based on the thermocouple effect. Each egt/cht gauge requires a certain thermocouple type to respond properly.
