Bose A20 / A30 6-pin Redel to GA Adapter Allows you to use a Bose A20 or A30 panel powered headset in a fixed wing aircraft that is not specifically wired with a 6-pin Redel connector. Simply plug your 6-pin Redel connector from the Bose A20 / A30 to this adapter and you'll have dual plugs that can be used in almost any fixed wing aircraft. Part # PA-89/A20. |
The adapter worked great with the Bose headset. Spruce sent the items to me in two days, couldnt be happier!
Pilot A20 6 Pin To GA Adapter
Worked perfectly with the Bose ANR headset and of course Spruce shipped fast!
Pilot A20 6 Pin To GA Adapter
Plug and Play works good
Pilot A20 6 Pin To GA Adapter
Excellent product
Pilot A20 6 Pin To GA Adapter
Pilot A20 6 Pin To GA Adapter
Item as described, fast service too.
Pilot A20 6 Pin To GA Adapter
Pilot A20 6 Pin To GA Adapter
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
No, this will only work on the Bose A20 headset.
Please use part number 11-03570 to go from a Bose X Lemo plug to Dual GA Plugs. See "Alternate Items".
No, please see part number 11-03570 for the Tango.
Yes, this will work with the AKG AV100.
Yes, the David Clark One-XP has AA battery integration in the control module. Since it has the AA battery capability. this adapter will work fine. Remember, when using this adapter, the headset ANR will be powered from the AA batteries and not from ship's power.
The Bose A20 6-pin lemo cable has a place for batteries. You will need to have the batteries in the cable assembly for the ANR to work.
If your ANR headset has a battery power assembly module, then this adapter can be used. If you have an older version of the A20 or a Bose X, you will need Part # 11-03570 which has a 9 volt power supply to run the ANR.
Yes, please see part # 11-06533.
No, this is designed to work with the aviation headsets with the 6-pin Lemo plug.
Yes, it will work with the PFX 6-pin lemo version.