Part Number | Tube Dia. | Price | Buy |
---|---|---|---|
MS21919-WCH2 | 1/8" | $1.66 | |
MS21919-WCH3 | 3/16” | $1.45 | |
MS21919-WCH4 | 1/4" | $1.62 | |
MS21919-WCH5 | 5/16" | $1.31 | |
MS21919-WCH6 | 3/8” | $1.36 | |
MS21919-WCH7 | 7/16” | $1.47 | |
MS21919-WCH8 | 1/2" | $1.64 | |
MS21919-WCH9 | 9/16" | $2.75 | |
MS21919-WCH10 | 5/8” | $2.98 | |
MS21919-WCH11 | 11/16" | $2.13 | |
MS21919-WCH12 | 3/4" | $1.83 | |
MS21919-WCH13 | 13/16" | $2.45 | |
MS21919-WCH14 | 7/8" | $2.42 | |
MS21919-WCH15 | 15/16" | $2.71 | |
MS21919-WCH17 | 1 1/16" | $2.18 | |
MS21919-WCH18 | 1 1/8" | $3.85 | |
MS21919-WCH20 | 1 1/4" | $2.74 | |
MS21919-WCH22 | 1 3/8" | $2.76 |
Band Material: Corrosion Resistant Steel Cushion Material: Silicone - For elevated temperature usage in phosphate ester based fluid and other synthetic fluid contaminated areas. Unaffected by ozone. Not resistant to petroleum based fluids. Color is white. |
Great clamps, just not what I was hoping for. I need the white insulation material to be Teflon and not rubber.
Clamp 5/8 MS21919-WcH10
Clamp 1 1/4 MS21919-WcH20
Clamp 11/16 MS219196-WcH11
Clamp 1/2 MS21919-WcH8
Good producy
Clamp 3/8 MS21919-WcH6
Clamp 3/4 MS21919-WcH12
These require much less force to close shut than the black clamps because the SS band is much less stiff. And the rubber wedge design keeps wires from being pinched when the band is closed.
Clamp 13/16 MS21919-WcH13
GREAT
Clamp 1/8 MS21919-WcH2
GREAT
Clamp 3/16 MS21919-WcH3
Great!
Clamp 1 1/4 MS21919-WcH20
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
These are listed as corrosion resistant steel.
The hole size is .199 min to .209 max diameter.