POROUS TEFLON™ COATED RELEASE FILM - #7025 is used where a medium weight porous release fabric is required on the surface of a part. During the cure of the assembly it will allow excess resin and all of the air and volatiles to pass into the bleed/breather ply (CFM Airflow 70). At completion of the cure the fabric will release cleanly from the assembly. Color: Brown. Width: 37-1/2". Sold per yard. |
Does exactly what it needs to do, to perfection.
Porous Teflon Ctd Release Film
super easy release on carbon fiber layups
Porous Teflon Ctd Release Film
best release film for complex surfaces or over veneers that can be damaged, best price I have found for it here.
Porous Teflon Ctd Release Film
Quick shipping, quality porous Teflon. It was used in composite manufacturing.
Porous Teflon Ctd Release Film
excellent quality. FANTASTIC service... quickly arrived!
Porous Teflon Ctd Release Film
I have used other peel plies in the past but nothing compared to this Porous Teflon! Where others one has to struggle to remove, the released easily yet leave a great finish ready for gluing or painting. Highly recommended!
I use this in a vacuum resin infusion process for a thin piece. It is fragile when green and this teflon coating just peels off with low force and does not tend to damage the work. It is fantastic, and a life saver for these fragile parts. I have tried others but this product was the best teflon coated product. Highly recommended.
Peel-ply is awesome! I wouldnt roll a tube without it anymore. This stuff peels right off after your resin has cured and leaves a very lightly textured surface with very little sanding if any is needed.
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The max temp is 550*F. We have posted the tech data sheet to the web page in the "Documents" tab. Please review it there.
No. This does not have an adhesive on one side.
It is flexible, kinda similar to a dacron type fabric. Not paper like.