THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | +61 (1800) 953522

Acrylic .080 2 X 4 Clear

$24.75/Sheet
Price Includes GST
Part# 03-49904
SizeLb./Sq.Ft.ThicknessPN
2x4.49.080 Clear03-49904

Overview

Note: Plastics fulfill from a U.S. distribution facility - Expect a lead time of approximately 90 days for fulfillment.


American made Acrylic Sheet Grade C to Specification
LP-391 is unshrunk.

When heated to forming temperature of 220-250°F, it will shrink about 2.2% in length and width and will increase about 4% in thickness. When heated to a pliable state it can be drilled, sawed and machined.

Excellent resistance to weathering and less than half as heavy as glass and has good impact resistance.

.060" or .080" thickness is generally used for side windows and .118" for windshields. Both sides are paper covered for protection.
Sheet size: 48"x96". Sold in 2'x2' increments only.

Reviews

Came well protected an as advertised.

Lloyd
April 30, 2021

Very good packing

Mike
January 13, 2021

Exactly what I ordered. A 2x2 sheet of 0.180 acrylic in smoke. Cuts very nicely with a fine bandsaw blade. I got a 1/8 acrylic bit also and after initial piercing with the 1/8 bit, stepping the holes up worked fine.

William A
October 8, 2019

Exactly what I ordered. A 2x2 sheet of 0.180 acrylic in smoke. Cuts very nicely with a fine bandsaw blade. I got a 1/8 acrylic bit also and after initial piercing with the 1/8 bit, stepping the holes up worked fine.

William A
October 6, 2019

I deal with Aircraft Spruce for all my Acrylic and Delrin needs. Expertly packaged, fast, and low shipping rates. Clean, quality product. Friendly telephone staff who arent afraid to call to confirm details of order if required. I do a lot of online business, and by far Aircraft Spruce is the best. P.s. Hats off to the shipper who packages the acrylic panels before shipping. A lot of thought has gone into making sure the acrylic doesnt get damaged in transit.

Bob
January 12, 2019

Aircraft spruce has become my new source for acrylic and will see repeat business in the future. Sara and company were great, the prices were very good, as was communications. The only small issue was that the 3 pieces they cut were not exactly the same length which caused a couple small issues. Thanks.

Emerson J
May 20, 2017

Q&A

Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Do you have 1/16 in the green tint? Is this optical aviation acrylic?

We do not stock green tinted 1/16" plexiglass/acrylic sheet.

Q: I can't decide on clear, smoke or green for my homebuilt. Can you supply small samples?

We do not have any samples of this material to send but we also do not have a minimum order. The smallest amount we can send would be 2x2 of each type.

Q: Are you able to cut the acrylic sheet before shipping?

Yes, we can cut acrylic sheet.

Q: Does this acrylic sheeting meet any FAR specs and if so, what ones?

No, we have no FAR data on this acrylic sheet.

Q: What is the dimension of the acrylic sheet on your website? For eg. 0.118 smoke?

Please see the Size column on the web page. The first column lists the size. That is in feet, so the 0.118 smoke is available in 2x2, 2x4, 4x4, or 4x8 sheets.

Q: Do the acrylic and Lexan sheets only come in 2 x 2 squares or can you get the full 4x8 sheet uncut?

Each size is available in 2 x 2, 2 x 4, 4 x 4, or 4 x 8 sheets. Each size is a line in the ordering grid.

Q: Can a 4 x 8 sheet of .118 acrylic be rolled for shipping?

No, we do not recommend this product be rolled.

Q: Is this acrylic sheet cast, or extruded?

This is extruded.

View in Catalog

View Image View in Catalog