Gar Kenyon 17000 TCBM-17000 brake master cylinder kit for the Piper PA28 and other models with the 17000 / 455-944 master cylinder. |
Worked great on my PA-28-180. I replaced hand brake seals at the same time.
455-944 / 17000 Gar-Kenyon Brake Master Cylinder Kit For The Piper PA28, PA32 And PA44-180 Series
We put seal kits in all 4 toe brake master cylinders and a different kit in the parking brake master cylinder. Starting with the hand brake fully aft and after one pass at bleeding the left brake and one pass at bleeding the right brake by only pumping the hand brake, and keeping the reservoir full, the toe brakes and the hand brake was firm and fully useful. My takeaway from this job is if you cant bleed the brakes easily in a PA 28, you probably need new seals.
455-944 / 17000 Gar-Kenyon Brake Master Cylinder Kit For The Piper PA28, PA32 And PA44-180 Series
Bleeding these is the hardest part!
455-944 / 17000 Gar-Kenyon Brake Master Cylinder Kit For The Piper PA28, PA32 And PA44-180 Series
Good stuff
455-944 / 17000 Gar-Kenyon Brake Master Cylinder Kit For The Piper PA28, PA32 And PA44-180 Series
This product worked as described and I was able to reseal the left toe brake on my Piper Arrow. Consider rebuilding the other side at the same time as its easier to do two at once. Also reseal the parking brake at the same time as you will be uncomfortable on your back and drenched in hydraulic fluid anyway. Better to have this experience only once.
455-944 / 17000 Gar-Kenyon Brake Master Cylinder Kit For The Piper PA28, PA32 And PA44-180 Series
Excellent delivery. Kit saved time over ordering individual parts. Well done!
455-944 / 17000 Gar-Kenyon Brake Master Cylinder Kit For The Piper PA28, PA32 And PA44-180 Series
455-944 / 17000 Gar-Kenyon Brake Master Cylinder Kit For The Piper PA28, PA32 And PA44-180 Series
Seals fit perfect
455-944 / 17000 Gar-Kenyon Brake Master Cylinder Kit For The Piper PA28, PA32 And PA44-180 Series
Excellent kit with all items needed to rebuild PA28 brake master cylinder.
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
1 ea. 110-3/16 | 1 ea ms28775-113 | 1ea ms28775-110 | 1 ea ms28775-012 | 1 ea xrc-313
Per the vendor that aircraft should use a #17000 and this kit would be correct.