Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Clear Pulse Line 3/8 OD 1/4 Id
MFR Model# AP02T252PENA
Overview
|
Connects engine pulse outlet to fuel pump pulse inlet. **Sold by the Foot** |
Specifications
- Outside Diameter: 3/8"
- Inside Diameter: 1/4"
- Thickness of the Wall: 3/32"
Reviews
As ordered and timely delivery - good product
Verified Purchase
Clear Pulse Line 3/8OD 1/4Id
Verified Purchase
Clear Pulse Line 3/8OD 1/4Id
Verified Purchase
Clear Pulse Line 3/8OD 1/4Id
👌
Verified Purchase
Clear Pulse Line 3/8OD 1/4Id
Awesome as always
Verified Purchase
Clear Pulse Line 3/8OD 1/4Id
Good product fast delivery thanks.
Verified Purchase
Clear Pulse Line 3/8OD 1/4Id
Thanks for excellent service and on time.
Verified Purchase
Clear Pulse Line 3/8OD 1/4Id
My wife and I mounted a fuel tank on a utility trailer so that we could fuel our aircraft outside the hanger. The fuel line is used as a sight glass on the side of the tank to allow us to determine when to reorder. Also, we use the line as a recycle feed back to the tank off the pump to very flow and recirculate the tank during the fueling process. The product works great!
Great for transferring HO into the strut.
Ive had great success using this pulse line on my ELSA Trike. Ive seen fuel line being used (on an ultralight) and I recommended that the UL pilot use pulse line from Aircraft Spruce instead. In my opinion the fuel line is too flexible to transmit a strong pulse to the mechanical fuel pump and reduces the efficiency of the pump. In contrast the pulse line with its thick-walled construction carries a stronger pulse ensuring peak performance of the fuel pump. As a tip, if I had difficulty pushing the pulse line over a fitting I would put the pulse line over needle nose pliers and briefly heat the end of the pulse line with a heat gun while opening the pliers. This would make it easier to push the pulse line over the fitting.
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, but auto fuel with a high alcohol content may damage over time.
Push-On barb type fittings are commonly used with this tubing.
This is a Urethane base tube.
