The Herbie Clip hose clamp The Herbie Clip hose clamp is the original double toothed (double row of teeth) ratchet clamp. This makes the Herbie clip twice as strong (up to 200psi depending on hose work and spigot) as similar hose clamps with a single row of teeth. The Herbie Clip hose clamp combines its high strength with other key features such as: non-corrosive and resistant to many chemicals, simple to install can be fitted before or after the hose is in place, minimum leak path, lightweight, easy to use (no sharp edges to cut the operators), fully compliant with ROHS, UL listed (nylon 6.6.) Features:
|
havent tried this yet. Looked interesting
Plastic Hose Clamp - Herbie Clip - 0.36 - 0.41Inch - Black - PA66
Perfect item
Plastic Hose Clamp - Herbie Clip - 0.36 - 0.41Inch - Black - PA66
easy to use
Plastic Hose Clamp - Herbie Clip - 0.36 - 0.41Inch - Black - PA66
Usually use metal fuel hose clamps but these seem to be a better clamp for that purpose.
Plastic Hose Clamp - Herbie Clip - 0.36 - 0.41Inch - Black - PA66
Exactly as described, eliminated lots of sharp ends of original metal spring clamps
Worked just fine
Dont have to deal with rusted metal clamps or clamps that cut into hose.
easy to apply using a standard pliers. They are cheap so order plenty as they appear to be a one time use.
Work fine, but pricey compared to other sources.
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
We would need to know the OD of the hose. Then, once you have the OD you can use the reference chart to find the size clip whose range contains the OD.
The 05-00940 can be used on 1/4" I.D. fuel line with 3/8" O.D.. Not all fuel line is the same, so just verify the O.D. of the fuel line you are using.
You would want our part number 05-00940.