I got this SCAT all over my engine, and now it stinks! Fortunately, it works as-intended, so I guess Ill leave it in for now, hoping the stench will burn off.

Ali S Verified Purchase

SCAT-8 Ducting 2 5Ft

Quick service and excellent product.

SCAT Tubing - As always, ACS delivers promptly to my doorstep!

What on earth is there to review? It is a two foot length of tubing shipped as I ordered it.

It work perfectly

It works well for the diesel heater on my boat.

using it for an exhaust extension for my generator and it seems to work great. Well see how long it lasts...

I give this product five stars for form fit and function. The coiled wire that gives the tube its structure is embedded in the wall of the material, not just free-floating in the ID of the tube. Great product so far.

got it the next day, thanks.

I have not installed the ducting as yet. The ducting looks like a perfect replacement for the worn original.

Excellent fit good service

Great quality product, shipped out the day after I placed the order. I was in need of flexible air duct tubing, not for an aircraft but a 50 yr old vintage car I was working on. The only place I could find the correct size I needed was through Aircraft Spruce Co. They had so many size choices in 1/4 inch increments I was amazed.

Good quality thanks

ok

shipped promptly, undamaged, easy ordering. Thank you.

This time I used the 2ID -8 ducting. I purchased a nominal 3 ft length (quantity 1) to run from the heat muff to the defroster inlet of my Musketeer. As I said in my 2018 review, while the ducting is single layer, the interior wire is embedded in the red stuff rather than just sitting on the interior surface as with the older materials. As such the wire is covered in the red material and does not tend to rust as in the past nor does the wire try to escape the interior. One can still dislodge the wire without ripping the material when prepping the ends for attachment purposes.

Product arrived ahead of time and was exactly what was ordered. Very happy with the service.

Seemed to me way better quality than the hoses that came in the kit of my home built, flexes very well.

Perfect fit in my 1983 Porsche 911 back dated heating system duct work. Great color too!

Nice product

Very nice ducting. Works well

Very pleased, the size I needed was in stock and arrived promptly.

Perfect

Good quality hose worked as advertised.

Great high temp product. Used on my custom build Porsche 911 for heat exchanger ducting.

Processed and sent in a timely manner with the scat tubing packed so there was no damaged.

Excellent product. I am using it to replace the heater ducting on a 1987 Porsche. It is very high quality ducting, and easy to work with. An added benefit is that it comes with a clear plastic outer covering which protects and keeps the duct clean during installation... then the clear plastic can simply be removed. I also give top rating to the service and quick delivery from Aircraft Spruce. Thanks!

Good ducting for running from the baffling to the muffler on my C185

FAA quality! Fast shipping!

for replacement of frayed part should work fine

Quality material. The cut to length option makes it affordable for the owner of a single plane and it sure makes the engine compartment look nice when you have new scat tubing in there.

Quick service and shipping.

Delivery was timely, the quality of ducting is very good installation was easy due to cut to size.

Fits perfectly. Thank you

Looks good but I ordered the wrong size so sent it back. Credited already. Thank you. New 3 inch variety already installed and perfect .

Soft and flexible. Ducting like it should.

shipment was process immediately and received promptly! We only paid for UPS Ground however it was here the next day.. Great service!

I have had nothing but excellent service from Aircraft Spruce.

We get good quality parts from Aircraft Spruce every time.

Excellent Product Replaced my Ferrari brake ducts with this upgraded duct, higher spec material then OEM

Perfect for my aircraft preheater. Easy to order the correct size and length. Good quality and quick shipment.

Installed as a replacement for my avionics stack cooling. Performed as expected ... shipping was quick. Satisfied with my purchase.

Very High Quality.

A factory stick is 13 feet long and it is good that I did not try to save money and order less. I only had about six inches left over. I figured I needed about 11 ft as that is what I took out but routed the new SCAT a bit differently and less tight so ... I used the -5 one and a quarter inch size for the vent ducting re my Musketeer. Per a previous review, the steel wire is somehow internally covered as well and hence does not spring out at the end - much nicer than previous material I have used.

Shipping was incredibly fast! Product was exactly what I needed.

It has ben many years since I did business you guys. The service has not changes in all of these years. Great! When I needed this scat hose for the defroster on my 1938 Packard I saw Aircraft Spruce on the web and I knew exactly where to go. Keep up the good work.

Exactly what I ordered and needed. Great quality and fast shipping

Fit was great.

Packed great. Thick material.

Very easy to work with and flexible tubing for my hot air!

I used this for a high-performance car application, and it worked like a peach! I am thrilled with the result and the product itself - excellent!

This is an excellent product. Replacing heater hose on a vintage Porsche .Oem material on car was nowhere near the same quality

Great service... professional assistance.. THANKS !!!! Keith Arnold

Good quality. Arrived quickly.

excellent

Scat came cut to length with the rest of my order looks great thanks as always

Great product, came in good shape. Recommend.

great product. thanks

Good product consistent quality

The duct was satisfactory. Only minor complaint is that it was flattened in one spot when I received it.

B.O. was not very timely , everything was OK once received.

As ordered delivered as promised.

Thanks: Arrived intact, packaged well via USPS. However, I added a note to cut the two feet into three eight inch pieces. I received one piece 27 inches long and had to cut an eight inch piece. Therell be three inches wasted.

Used it for my 66 Mustang II rack and pinion frontend conversion disc brake cooling. Have the inlet behind the headlights into ABS tubing then clamp the flex duct to the ABS and snake SCAT ducting through the upper wish bone to the disc brake duct bracket and used another stainless steel worm clamp. The duct punctures too easy with a sharp object so I had to use chafe guards where it rubs against anything. Flexes very well steering L/R stop to stop. Ill take brake temp. readings to see if it is working.

Great to deal with quick delivery arrived packaged well, The only negative is the freight cost. Knowing its not in Aircraft Spruces control.

good quality. this duct has the metal embedded on the inside and outside with silicon which is nice because the metal wire inside does not shift. A very nice improvement over the older stuff. Not sure why there is white twine on the outside of the duct. That does not stay in place very well. But overall very satisfied.

Product received just as ordered after a lengthy backorder delay.

This tubings thread wrap is very loose. The scat I replaced had that thread glued down. Other than that, it is fine.

What can I say. Its tubing. I needed it to replace old tubing for the oil/air seprator. The problem was it was on back order for months. I probably should have cancelled the order and contacted another supplier that had it in stock. That is the only problems I have ever had with Spruce is the backorders take forever.

Ducting arrived after a somewhat slow shipping process (UPS Ground). The material is rather thin and tears easily, so I would not purchase this again. Im still looking for a compatible tape to reinforce the ends.

Duct appears to be of good quality, However the description of this isnt correct. The description states that the wire on the inside is visible. It is not visible but rather the wire is coated with the rubber material. This prevents me from pulling some wire out and cut it so that it makes an end without wire that can be clamped to the flange end on the vent.

This is not SCAT equivalent. The reinforcement string is not bonded in place as with real SCAT tubing, so when you cut the tube to length the string immediately unravels and begins to unwind from the tube. Also, the wire coil spacing is larger than real SCAT tubing. I do not recommend this stuff for aircraft.

Was damage in shipment because was packed in same box as oil. Cases of oil crushed some of this hose. Cannot believe the gasket was not damaged . Poor judgement by whoever is packing boxes