Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Sky-Tec Starter 122-NL
MFR Model# 122NL
Overview
"Featuring Sky-Tec’s Exclusive KPS® Kickback Protection System, Sky-Tec’s NL-series of starters fit all Lycoming powered aircraft. Unmatched duty cycle capabilities and durability on even the hardest starting 12V aircraft. Now available as factory original equipment on nearly all new Lycoming-powered airplanes. No other starter is manufactured to more exacting standards for quality, reliability and workmanship than Sky-Tec Lycoming starters. All NL-series starters are FAA-PMA certified as replacement parts for all non-geared, flat Lycoming engines. Sky-Tec NL-series starters fit without modification or 337 paperwork. At only 9.4 lbs., the NL-series is the lightest Bendix-free inline available. Generous two-year warranty."
|
Core Return Policy
Any unit being returned for core or warranty core credit shall be, as removed from the engine, complete and not disassembled. No core or warranty core credit will be allowed for automotive units. Units that are rusty or cannot be overhauled for any reason will be classified as scrap, having no value. Units which have been weld repaired, as well as units which have been disassembled and then reassembled with old parts, will also be classified as scrap, having no value. A percentage of the core value will be charged for all missing or damaged parts. At no time will the damaged or missing parts charge on any unit exceed the core value of that unit.
1. Core will only be accepted for credit 12 months from date of invoice.
2. Cores returned in excess of cores invoiced will not be accepted.
3. Cores must be of like purchase, a directly superseded unit or replaced unit when installing an STC'd product.
4. Competitive product cores are acceptable returns.
5. Cores must have a legible data tag for part and serial number verification.Note: Customer will need to provide core for overhaul in the event our supplier does not have cores available to overhaul.
Documents
- SkyTec Fit Guide (PDF)
- Starter Installation Manual (PDF)
Reviews
I installed on a 1954 PA-20 Pacer with an O-320. The starter has three auxiliary mounting lugs, one of which is in the way of the rear port side mounting bolt for the starter. Also had to modify the oil cooler mounting bracket as it was an interference fit with the battery connection and the auxiliary unused mounting lug. Also had to install a 5 longer battery cable as the starter battery connection was further forward than the original. Would have been a lot easier to have stuck with a LaMarr starter which is what it originally had.
Verified Purchase
Sky-Tec Starter 12V 122-Nl
Solid starter. Great upgrade/replacement to my original starter on my 1963 PA-28-180. Be sure to get the correct tooth count according to your flywheel ring gear, either 122 or 149.
Verified Purchase
Sky-Tec Starter 12V 122-Nl
I’ve had these starters in service for 10 or more years. They work great. They used to be switchable between 12/24 volt. Not anymore. Make sure to order the correct one.
Verified Purchase
Sky-Tec Starter 12V 122-Nl
Well after 6 months of getting a rebuilt starter that didnt work and getting warrantee for it I placed and order for the Sky-Tec starter 12v 122-NL. The starter works great so far with mutable starts and shut downs. So I had to add a length of starter wire from my stock it was 5.5 inches from eye to eye and covered the bolt and acorn nut with heat shrink. I had to move the oil cooler out of the way to get a nut on the back bolt, not a big thing just an extra hour to the job. There is lots of clearance between the starter and oil cooler on My 1972 PA- 28 140 . I dry ran the starter 8 times to make sure it worked. I did see the bendix teeth had test mark which I was happy to see that it was tested under load. Its nice to know there is a 2 year warrantee on this starter and not 6 months on a rebuild. The front were the bendix in housed is polished and looks great. The starter is good quality manufacturing. My recommendation is to spend the extra money and dont get a rebuilt starter that takes 2.5 months to get and has a bad bendix right out of the box. Im glad this starter problem happened at home because it would have cost me $1000.00 in out of town costs.
Verified Purchase
Sky-Tec Starter 12V 122-Nl
Verified Purchase
Sky-Tec Starter 12V 122-Nl
As advertised. Installed easily and spins the prop fast.
Verified Purchase
Sky-Tec Starter 12V 122-Nl
Great starter! Replaced the old Sky-Tech 122-12PM with the New Sky-Tech 12V 122-NL. It spins faster then the old one and from now on I dont need to loose the starter to remove the Ring Gear from the engine flange. Smart design!
Verified Purchase
Sky-Tec Starter 12V 122-Nl
Light weight and much faster than the original starter. So far, this starter is everything they claim.
Verified Purchase
Sky-Tec Starter 12V 122-Nl
Lighter than original yet in turns engine over faster
Verified Purchase
Sky-Tec Starter 12V 122-Nl
This starter worked great turning over an IO-720 engine. The older starter always had to be rocked to get it turning. Not this one. Good buy!
Verified Purchase
Sky-Tec Starter 12V 122-Nl
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
That is correct. The core charge is refunded when the old starter is returned.
Voltage must be a minimum of 11 volts for the starter to function. In-rush current would be approximately 190 amps and continuous current approximately 90 amps.
This does require an external solenoid.
