Note: 08-05882 is similar to 67193 and RG-67193 but not FAA Approved for Certified Aircraft. 08-01187 is similar to 75906 and RG-75906 but not FAA Approved for Certified Aircraft. "O" Series Lycoming Valve Cover Gaskets These homebuilder's Lycoming valve cover gaskets replace the original cork gaskets which come standard on Lycoming 0-235, 0-320 and 0-360 engines. These new gaskets are molded from high temperature silicone rubber and do not harden over time so they can be re-used again and again. This hi-tech silicone rubber offers a much lower compression set, so it is superior at maintaining an oil-tight seal for the life of the engine. NOT FAA approved. For experimental aircraft only. Angled Valve "IO" Series Lycoming Valve Cover Gaskets These gaskets are for the fuel injected "IO" series, sometimes referred to as the Angle Valve cylinder Lycoming, as well. these gaskets are molded from the same high-temperature silicone rubber as the "O" series gaskets above, and do not harden over time, so they can be reused again and again. This hi-tech silicone rubber offers a much lower compression set, so it is superior at maintaining an oil-tight seal for the life of the engine. They are not FAA approved and are not manufactured under a PMA. These are similar to Lycoming part number 67193 used on Angled valve Lycoming engines IO-360, IO-540, IO-720. |
Homebuilders Valve Cover Gasket For Lyc
As advertized
Homebuilders Valve Cover Gasket For Lyc
Homebuilders Valve Cover Gasket For Lyc
Way Better Than The Cork Gaskets
Homebuilders Valve Cover Gasket For Lyc
Homebuilders Valve Cover Gasket For Lyc
Homebuilders Valve Cover Gasket For Lyc
Perfect fit for my engine, a Lycoming 0-320-BA.
Homebuilders Valve Cover Gasket For Lyc
Just as advertised
Homebuilders Valve Cover Gasket For Lyc
After several months it gets brittle. Cant reuse it. Purchase 4 new ones works great. Seals really well. Great product.
Homebuilders Valve Cover Gasket For Lyc
Homebuilders Valve Cover Gasket For Lyc
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, these are silicone gaskets.
The thickness of 08-01187 is 1/8". They are the same size and shape as 05-11181, just made by two different manufacturers.