Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Westach Bayonet EGT Probe (Rotax)
MFR Model# 712-4D6K
Specifications
- K - wire EGT probe
- 8x1. Ommthd
- 3/16" OD
- 2-1/2" Tip
- 4' lcad
Reviews
Just my particular experience, but if you need to replace one EGT sensor in a two sensor application, get reo Was exactly what I needed. No fuss- no muss. Came to me quickly and is now doing the job!
Verified Purchase
Westach EGT Probe K Wire 8X1.0MM Thd 712-4D6K Non-TSO
very well built, easy to install
Verified Purchase
Westach EGT Probe K Wire 8X1.0MM Thd 712-4D6K Non-TSO
Fit perfectly.
Verified Purchase
Westach EGT Probe K Wire 8X1.0MM Thd 712-4D6K Non-TSO
I had these on my Rotax 503 engine and I recently did a rebuild on it. I broke one trying to get it out of the exhaust manifold. I really liked these as they go under the head bolts and eliminated the problem with compromising the end that goes against the head every time I changed my spark plugs. I had two sets that went under the plugs before I got ones like these that went under a head bolt. They lasted a long time. I definitely recommend these. Purchase and shipment from Aircraft Spruce was prompt and problem free.
Was carefully tightening the probe nut into the pipe and with hardly any pressure whatsoever it snapped right off. I have done bodywork for 40 years so I know what it takes to overtorque a nut
Verified Purchase
Westach EGT Probe K Wire 8X1.0MM Thd 712-4D6K Non-TSO
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Neither manufacturer was able to confirm compatibility. We were offered these specs for the probe: This probe is a type k probe that is 48in long and rounded.
Yes, this is compatible with those two units.
Garmin recommends Garmin probes with the G3X.
8 x 1.0 mm
This will thread into an 8x1.00mm threaded exhaust port.
