Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
White 12V (LED Maplight W12)
MFR Model# OP4-W12
Overview
FAA NORSEE APPROVEDThe body of the maplight is constructed of aircraft grade 6061 T6 aluminum and black anodize treated for protection from corrosion. The LED bulbs and internal components are high quality components, and are engineered to withstand 150% of their rated voltage without damage. The wire is tefzel coated mil-spec wire used in certified aircraft and the component potting material is a two part epoxy making this maplight highly vibration and shock resistant. The average bulb life of the LED used in this product in excess of 20,000 hours of use and the maplight draws only 20 milliamps of power with virtually no heat produced.The red LED used in this maplight gives the most light available in environments where night vision must be retained. This "LED Maplight" is built to be durable, simple to operate, lightweight and compatible with dimming systems. Each "LED maplight" is tested twice during production for maximum quality and customer satisfaction. |
Documents
Reviews
As represented
This is a very well made map light and looks professional
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
They can pivot one direction. So depending on how you mount it, they can move up and down or side to side. It does NOT swivel in all directions.
This would mount in a .465 inch diameter hole and the total installed height when extended is 2.125 inches. The Maplight is comprised of 4 LED bulbs. 12 volt model - Maximum 15 volts DC @ 30 milliamps 24 volt model - Maximum 30 volts DC @ 30 milliamps
Per the supplier: You can use up to 5 amp fuse.
Yes, a potentiometer will work as a dimmer, the manufacturer does not have ohm data. The light draws only 30 milliamps so a low ohm potentiometer would be best.
20 inches.
